Showing posts with label Technique. Show all posts
Showing posts with label Technique. Show all posts

7 August 2019

LEGO® Ideas 21318 Treehouse: the build

Time for the second part of our LEGO® Ideas 21318 Treehouse review, looking at the build. We covered its elements in part 1.


In a great alteration to Kevin Freeser's original fan submission, which had a grey square base, César Soares' official version has an irregular green shape with a stream running through it. The stream is Dark Azure plate (including the 4x8, Element ID 6209672, its third appearance in sets) with a layer of Transparent 1x1 and 1x2 plates on top.

24 July 2019

Plant or Animal? A closer look at Plant, w/3.2 Shaft, No. 2

Bright Bluish Green [TLG]/ Dark Turquoise [BL] Plant, W/3.2 Shaft, No. 2 (Element ID 6262134 | Design ID 49577), known as 'Plant Thallus, Seaweed' on Bricklink, appears in LEGO® Friends underwater themed sets released this month in Europe.  I initially thought this element was depicting coral rather than seaweed, but its official LEGO name suggests it is a plant, not an animal.



Either way, this interesting new element immediately caught our eye and we thought it would be fun to take a closer look.

4 July 2019

LEGO® Overwatch: Weapon No. 20

The new gun introduced this year for LEGO® Overwatch sets is officially named "Weapon, No. 20" or "Minifigure, Weapon Gun, Blaster with Studs on Sides, Bottom, and Front" by BrickLink. It's a super interesting piece, so we asked Jonas Kramm to explore its geometry and capabilities.


For the Overwatch theme, The LEGO Group (TLG) introduced a new weapon mould (Design ID 44709). So far it comes in four colours:

1 July 2019

LEGO® Overwatch review: 75974 Bastion

Over the next week or so we have a series of LEGO® Overwatch articles for you. Firstly, following on from our reviews of 75975 Watchpoint: Gibraltar and 75973 D.Va & Reinhardt a few months ago, we now have one more set review which we asked Victor Pruvost to check out.

In our third LEGO® Overwatch review, we’re going to examine 75974 Bastion. With 602 parts and  a RRP of £54,99 / US$49,99 / 59,99€, Bastion is the second-largest set of the January 2019 Overwatch wave.

22 June 2019

75936 Jurassic Park T. rex Rampage: set review

We hope you've been enjoying the run of LEGO® Jurassic World articles we've published recently including two designer interviews and a look at the new parts in 75936 Jurassic Park T. rex Rampage. Today, Jonas Kramm examines the build and techniques of that set.

75936 Jurassic Park T. rex Rampage is only the second set from the LEGO® Jurassic World series that is a homage to the classic movie from 1993. It comes with 3120 pieces that get used to build a huge dinosaur, an enormous gate and an additional minifigure stand.

6 June 2019

The 1x8x3 25° Slope

We were surprised by a large new piece that appeared in a LEGO® set recently, so we sent a copy to Ben Davies (ProfessorBrickkeeper) to check it out.


Although the LEGO® 4+ sets (previously Juniors) may not appeal to all builders, the simplified sets have led to the introduction of several new elements over the past few years. The most recent of these is the 1x8x3 Slope (Design ID 49618), also known as Roof Tile 1X8X3/25º [TLG] and Slope 25 8 x 1 x 3 [BL], which comes in the new LEGO Toy Story 4 theme.


22 May 2019

2018 Bricks in Florence workshop: clockwork creations and moustachioed animals

Last November we attended Bricks in Florence Festival (BiFF), hosted by ToscanaBricks in Italy. We ran workshops with fan builders using new LEGO® parts from 2018 – the same seed parts we used at Skærbæk Fan weekend a few weeks prior. 

Robert Gigli "Mechanical Mechanic"

21 May 2019

2018 Bricks in Florence workshop: new part connections

Last November we attended Bricks in Florence Festival (BiFF), hosted by ToscanaBricks in Italy. We ran workshops with fan builders using new LEGO® parts from 2018 – the same seed parts we used at Skærbæk Fan weekend a few weeks prior. Today we're sharing some of the interesting connections our builders noted about the new elements on offer.

Hub Cap, dia. 24, No. 1 (37195)

Cristiano Grassi noted the ball at the tip of levers and walkie talkies sits neatly in the wheel 'spokes'.

20 May 2019

2018 Bricks in Florence workshop: the pantograph, candle and puppy ear

Last November we attended Bricks in Florence Festival (BiFF), hosted by ToscanaBricks in Italy. We ran workshops with fan builders using new LEGO® parts from 2018 – the same seed parts we used at Skærbæk Fan weekend a few weeks prior. 

Candle No.1 (Element ID 6234807 | Design ID 37762)

Here are a couple of microscale ideas using the candle introduced in Harry Potter sets.

Cristiano Grassi 'Future City'


18 May 2019

2018 Skærbæk Workshop: the lantern and the puppy ear

Two or three times a year, New Elementary run building workshops at AFOL conventions. Attendees use new LEGO® parts with general brick stock to come up with quick, interesting ideas. At Skærbæk Fan Weekend in Denmark last year, 70 builders explored some elements released in summer 2018. Here are some of our favourite creations and interesting techniques they came up with.

Lamp, No. 1 (Element ID 6227901 | Design ID 37776)
Design Plate 1X1, No. 1 (6231382 | 35463) 

Another two seed parts for you today. Lamp, No. 1 first appeared in Harry Potter sets in 2018 in Titanium Metallic [TLG] / Pearl Dark Gray [BL], but the Black version comes in other themes like Disney and Elves as well as the LEGO Xtra polybag 40312 Streetlamps.

As for the other, it's called Tile, Modified 1 x 1 with Tooth / Ear Vertical, Triangular on BrickLink but here at New E we prefer the nickname 'floppy puppy ear'. It is still only found in one set, the dalmatian Prince Puppycorn blind bag from 41775 Unikitty! Collectibles Series 1. Each bag has only one black ear, as the other is white. We gave our builders hundreds to build with.

Bailey Fullerton “Lantern Speeder"

"Every part is a spaceship part", be it thrusters...


17 May 2019

2018 Skærbæk Workshop: wheel hub

Two or three times a year, New Elementary run building workshops at AFOL conventions. Attendees use new LEGO® parts with general brick stock to come up with quick, interesting ideas. We’ve fallen a little behind at presenting the results to you so it’s time to play catchup! Just wind your clocks back to last September at Skærbæk Fan Weekend in Denmark where 70 builders spent a good couple of hours exploring some elements released in summer 2018. Here are some of our favourite creations and interesting techniques they came up with.

Hub Cap, dia. 24, No. 1 (Element ID 6227156 | Design ID 37195)

The Metallic Silver [TLG]/ Flat Silver [BL] hubcap is still only found in one set at present, 10262 James Bond Aston Martin DB5. Especially interesting are the illegal connections some people found.

Anne Jeppesen “Drone”

14 May 2019

2018 Skærbæk Workshop: the candle and the inverted tile

Two or three times a year, New Elementary run building workshops at AFOL conventions. Attendees use new LEGO® parts with general brick stock to come up with quick, interesting ideas. We’ve fallen a little behind at presenting the results to you so it’s time to play catchup! Just wind your clocks back to last September at Skærbæk Fan Weekend in Denmark where 70 builders spent a good couple of hours exploring some elements released in summer 2018. Here are some of our favourite creations and interesting techniques they came up with.

Candle No.1 (Element ID 6234807 | Design ID 37762)
Tile 1X3, Inverted, W/ 3.2 Hole (6223491 | 35459)

Two elements to focus on today. White Candle No.1 only comes in White so far and appears in three sets in the Wizarding World theme as well as BrickHeadz 40348 Birthday Clown and 10264 Corner Garage. The candle is made up of two sections; a 3.18mm diameter bar that is 3mm long and a wider 5.8mm hollow portion that accepts 3.18mm bar connections in its base.

White Tile 1X3, Inverted, W/ 3.2 Hole (Element ID 6223491 | Design ID 35459) was first introduced within the Unikitty theme last year but can be found within many sets now including 21043 San Francisco and 21150 Minecraft Skeleton BigFig with Magma Cube.


Rafal Piasek “Line Jumper"



12 May 2019

2018 Skærbæk Workshop: the pantograph shoe

Two or three times a year, New Elementary run building workshops at AFOL conventions. Attendees use new LEGO® parts with general brick stock to come up with quick, interesting ideas. We’ve fallen a little behind at presenting the results to you so it’s time to play catchup! Just wind your clocks back to last September at Skærbæk Fan Weekend in Denmark where 70 builders spent a good couple of hours exploring some elements released in summer 2018. Here are some of our favourite creations and interesting techniques they came up with.

3.2 Shaft Element, No. 1 (Element ID 6226706 | Design ID 37494) 

Called Hinge Train Pantograph Shoe on BrickLink, this is a relatively rare part as it only appears in two train sets and only in Black at the moment. You will find one in 60197 Passenger Train and two in 60198 Cargo Train. It's used as the pantograph to conduct electricity from overhead lines but we thought the plentiful 3.18mm connections and unusual angles would make it ideal for a parts festival.

Paul Lee "Micro post apocalyptic rover with steering and roll bars"

21 April 2019

LEGO® NINJAGO turntables

Sven Franic examines the unusual and interesting new turntable pieces that come in new LEGO® Ninjago sets like 70670 Monastery of Spinjitzu.

We don't often get younger age group LEGO playsets to pick apart here at New Elementary, which makes it easy to overlook some cool new parts. Ninjago model designers have really stepped up their game in interactive play functions, and I want to see if we can bastardize some of the novelties that come in LEGO Ninjago 70670 Monastery of Spinjitzu.


One of the recent features of several Ninjago sets are the hand-held minifigure turntables. Presumably to promote interactive and social play, the resourceful designers came up with a brick-built contraption allowing players to rotate a minifigure character and fight an opponent by mimicking some impressive ninja moves.

2 April 2019

More on the 3x3 Technic beam

Yesterday Victor P discussed the new Magenta Connector Beam 1x3x3 that does not yet appear in any LEGO® sets. Today he reveals it also comes in Black, explores more of its potential and explains how he found it for sale on the LEGO website.

In part 1 we explored the geometry of the new Connector Beam 1x3x3 and the kind of applications it could have in Technic builds. Today we’re going to experiment a bit further and see what other builds are possible with a few of them in hand.  Since I work in construction, one of the first things I thought of doing was a I-beam:



7 March 2019

Old Elementary: Duncan gets fly with Insectoids

One of our New Elementary parts festival builders, Duncan Lindbo, casts his mind back to an old LEGO® element that may well be familiar to fans who were youths during the 1990s. Remember the Insectoids? Well, Duncan does.


For many AFOLs, the late 1990s were a low point in set design. They think there were too many overly specialized parts, and they’re not entirely wrong… but because of that, there’s a lot of interesting parts that tend to get ignored by the AFOL community. Today, we’re going to explore a couple of Transparent Blue [TLG]/Trans-Dark Blue [BL] elements from the Insectoids line (1998-1999).

2 March 2019

2018 Parts Fest #2: Peter's Bloodborne beast and Vera Kamsha scene

In his second post, Russian builder Peter Guz showcases two more fantastic creations using the LEGO® elements we sent him for our parts festival.


When I saw candle parts, I imagined long and pale creepy fingers. I thought, who could have such fingers? I love the PlayStation game Bloodborne so much, and there are a lot of creepy creatures with cool designs in it. Vicar Amelia is one of the bosses, and the last high cleric of the Healing Church. She could not resist the curse of the old blood and became a beast.

28 February 2019

2018 Parts Fest #2: Peter's Post Apocalyptic World and Flying Fortress

We are continuing with our ongoing LEGO® parts fest and welcome our penultimate guest builder, an extraordinarily talented young builder from Russia, Peter Guz. We are huge fans of Peter's work, but even we did not anticipate the creations Peter made in a short space of time with a parcel of elements we sent.  Peter is a builder of few words but his images speak for themselves. This is the first of two posts by Peter.



“Lanterns have to light” thought I at first. And then I found the mecha leg Elspeth made using a Lantern in the blog post Enlightening Elements. I realised that I must complete it and build a light-up Lantern mech using Black Lamp, No. 1 (Element ID 6227901 | Design ID 37776).

22 February 2019

LEGO® Creator review: 10265 Ford Mustang

The LEGO Group have just announced the next car in the LEGO® Creator Expert series 10265 Ford Mustang, based on the 1967 Fastback and will be racing into LEGO stores and online from 1 March 2019. It has 1,471 elements and priced US $149.99/€129.99/£119.99. Jonas Kramm gets into gear to take a closer look under the hood of this 1960s American muscle car.


The LEGO Creator Expert theme’s new addition to your garage is a classic 1967 Ford Mustang. It’s a dark blue beast that comes with two play features and - even more importantly – includes two new moulds and more delicious recolours.

2018 Parts Fest #2: Devid VII's mecha, radiator and more

The next builder in our LEGO® parts festival is Devid VII, an Italian builder whose work I have admired for sometime, especially his mecha creations. Devid showcases a variety of ways to use our chosen parts festival elements, including this fantastic mecha just for us!