Review: 75442 The Mandalorian's N-1 Starfighter™ from LEGO® Star Wars™

The creation of the Mandalorian’s N-1 Starfighter was a clever attempt at some Star Wars™ fandom faction fusion. It blends what was beloved about the original trilogy’s lived-in, rugged, utilitarian, guts-on-the-outside design and applies it to a ship that epitomises the opulent Art Nouveau aesthetic of The Phantom Menace. Then it bundles that all together with one of the most popular duos of Disney-era Star Wars content. It’s a breathtaking move, perhaps giving many divided clans of fans something to agree on.

Will the LEGO® version of the N-1 impress? There's no yellow paint to grind off before we can see what's what, so let's take a look at the parts and see what this thing's made of!

We were given this product by The LEGO Group; the author's opinions are their own.
This article contains affiliate links to LEGO.com; we may get a small commission if you purchase.

75442 The Mandalorian's N-1 Starfighter™

• Release date: 1 May 2026
• Pieces: 1809
• Ages: 18+

Price: 

• US$ 249.99 on LEGO.com US
• CA$ .99 on LEGO.com Canada
• GB£ 229.99 on LEGO.com UK
• AU$ 429.99 on LEGO.com Australia
• 249,99€ on LEGO.com Deutschland, Nederland, France, etc

Other countries click here

 

The N-1 is also the subject of a satisfying ‘before and after’ origin scene from The Book of Boba Fett Chapter 5: Return of the Mandalorian, a barn-find hotrod renovation YouTube montage video stacked with nostalgic references.

With The Mandalorian and Grogu now in theatres, the marketing machine is almost as smooth and shining as the souped up N-1 itself! 

That’s why I think it seems like such a good choice for this year’s LEGO® Star Wars™ Ultimate Collector Series set, despite being depicted in mostly light bluish grey. Although this sleek, grey and silver-tipped starfighter with hammerhead-shark stylings sure is sexy.

New moulds

• 1x Windscreen Curved, Rounded 6 x 12 x 1 2/3 in Trans-Clear (6610322 | 8253)
• 8x Cone Quarter 3 x 3 x 2 Hollow No Studs in Metallic Silver (6615170 | 8064) 
• 12x Wheel 8 x 7.2 with Pin Hole in Light Bluish Gray (6572265 | 5805)

Windscreen Curved, Rounded 6 x 12 x 1 2/3 (8253)

As seems standard now that with larger, expensive sets, big canopy pieces are delivered in a separate bag as a means to protect from scratching. It is definitely a practice that I appreciate and have noted with smaller screens too. I hope this care will continue!

There's no exact match for the bow of this new canopy in existing bricks. I wonder why the decision was taken to make this a shallower curve in favour of a 3-module radius?

However, in negative space the wide end of the canopy fits perfectly below the 1x8x2 arch (16577, 40296, shown in dark grey above). The original 1x8x2 arch available prior to 2014 (3308) will not work because it lacks the small straight edge lip at the base of the arch.

The space underneath has no matching bows either, as hat internal curvature is actually one brick high. The closest match is the 4 x 1 x ⅔ curved slope double (93273, above left in red).

The footprint is trickier still to attempt a match for. 

There have been a few new long curved slopes introduced in the last year: a 1x8x1⅔ (7217, shown in light grey above) that first appeared in 75409 Jango Fett's Starship (see Tom's review of the 2025 Slave-1) and the even longer 1x12x1⅔ (7236) that first appeared printed in light bluish grey in set 10356 Star Trek TNG U.S.S Enterprise (see Kevin's review of the LEGO Enterprise) and is now available unprinted in white and in black. 

The 1x8x1⅔ is a reasonable match for a portion of the curve, I don't have the larger curved slope to try (prices were crazy for the very small number of unprinted options in the UK) but I think it would probably not match as well as the 1x8 anyway.

I had hoped that the 6x10 aircraft fuselage (87611) would fit better, but alas it appears to be a broader parabola. 

Cone Quarter 3 x 3 x 2 (8064)

The steep silvery macaroni slope!

Strictly this quarter cone is not quite two bricks tall; it looks about ½ a plate lower, so it's approximately 1⅚ bricks tall.

By raising the slope of a classic 4x4x2 cone (3943) by two modules, you can produce a perfect continuation of the cone with this new mold.

A classic 4x4 radar dish (3960, in black above left) or the updated hollow stud variety (35394) sits equally as well as the cone, where the recess almost matches the lip. Other 4x4 round elements may require some more complex support to fit flush with the top edge.

The slope doesn't quite match a 33° slope brick (in dark blue above right) on its side.

It's not a useful part in structural terms. Options are a bit limited because it only has anti-stud connections, and is an irregular height. It does fit very well with the parts you'd expect it to, though – e.g. all those that fit with 3x3 macaroni bricks.

In my various explorations, I thought that one tablescrap I made (above lower right) might lead somewhere, but it is little more a robo-egg! More on that later.

It's a beautiful piece and I hope we eventually see it in other colours.

Wheel 8 x 7.2 with Pin Hole (5805)

This new cylindrical element, used as pipework on the model, but is clearly a wheel rim. I wonder where and when it will turn up next?

This wheel hub is a really fantastic addition to the store of greebling parts; the two rims bring great visual interest. 

Obviously it shares a lot of similarities with other 1x1 cylindrical parts, and a lot of characteristics with existing wheel hubs too.

Accordingly, it works with the relevant tyres. Pictured here are parts 59895, 87414 and 30028.

A Technic pin hole in a hub of this size is something that I have often wanted. As you would expect from a Technic hole, the clutch is tight when pushed onto studs. Such a connection is surely illegal by TLG standards, but builders will be pleased – they fit perfectly side by side.

The possibilities for greebly connections and uses are quite exciting.

Recolours

As you would expect, there are some lovely parts arriving in light bluish grey in this set.

• 2x Technic Gear 14 Tooth Bevel with Axle Hole in Dark Orange (6628591 | 69762)
• 4x Weapon Sword Blade, Darksaber in Light Bluish Gray (6608941 | 3885)
• 2x Weapon Sword (Uruk-hai) in Light Bluish Gray (6608940 | 10050)
• 4x Cone Half 2 x 4 x 3 in Light Bluish Gray (6608938 | 38317)
• 5x Slope Curved 2 x 6 Inverted in Light Bluish Gray (6608944 | 6806)

The main event of course is that there are some exclusive pieces in drum lacquered metallic silver!

• 1x Slope Curved 2 x 2 with Stud Notch Left in Metallic Silver (6615159 | 5095)
• 1x Slope Curved 2 x 2 with Stud Notch Right in Metallic Silver (6615160 | 5093)
• 1x Slope Curved 3 x 2 with Stud Notch Left in Metallic Silver (6615171 | 80177)
• 1x Slope Curved 3 x 2 with Stud Notch Right in Metallic Silver (6615173 | 80178)

• 1x Wedge Curved 10 x 3 Left in Metallic Silver (6615161 | 50955)
• 1x Wedge Curved 10 x 3 Right in Metallic Silver (6615162 | 50956)
• 2x Slope Curved 8 x 2 No Studs in Metallic Silver (6615015 | 42918)
• 2x Wedge Plate 8 x 3, 8° Left in Metallic Silver (6617170 | 3544)
• 2x Wedge Plate 8 x 3, 8° Right in Metallic Silver (6617167 | 3545)

Rare pieces

In one other set

• 1x Bar, Curved U-Shape 2 x 3 in Dark Bluish Gray (6577787 | 7052) 16 are provided in 11371 Shopping Street - see Toby Mac’s review
• 1x Slope 18° 2 x 1 x 2/3 in Lime (6561723 | 5404) 2 available in 77237 Dodge Challenger SRT Hellcat Sports Car - see Tom Loftus's review
• 2x Tile 45° Cut 2 x 2 (Triangle) - Metallic Silver (6615007 | 35787) 2 more in 76215 Black Panther
• 4x Plate Round 1 x 1 with Hollow Stud and Underside Clip in Light Bluish Gray (6605616 | 5264) 3 more can be found in 77259 Audi Revolut F1 Team R26 Race Car - see Tom Loftus's review

• 1x Windscreen 6 x 8 x 2 Curved in Light Bluish Gray (6508818 | 5274) nearly two years since this part was first seen in 76295 The Avengers Helicarrier - see my review!
• 4x Wheel Cover 6 Spoke with Axle Hole - 43mm D. in Light Bluish Gray (6508515| 6607) four more were in 42210 2 Fast 2 Furious Nissan Skyline GT-R (R34) Car - see Alex's review and if our spotting is correct, another four will come in 75454 Imperial Remnant AT-AT™ with INT-4 in August 2026
• 2x Plate Special 1 x 2 with Angular Extension and Flexible Light Bluish Gray Tip in Light Bluish Gray (6394015 | 61406) one other is available in 75325 The Mandalorian's N-1 Starfighter from all the way back in 2022 see Thomas Jenkins's review
• 3x Plate Special 2 x 2 with Bar Frame Round in Trans-Light Blue (6585259 | 7068) a whopping 14 are supplied in 45202 Mars Mission Science Kit - see Toby Mac’s review of all the new education sets. 

In two other sets

• 7x Slope 30° 1 x 4 x ⅔ in Light Bluish Gray (6573768 | 7835)
• 2x Slope Curved 1 x 6 in Light Bluish Gray (6540832| 6801)
• 2x Tile Round 1 x 1 Special with Clip-Bar in Light Bluish Gray (6539381 | 77813)
• 2x Wedge Plate 4 x 2 Right in Metallic Silver (6617169 | 41769)
• 1x Tile Round 1 x 2 Half Circle in Reddish Brown (6603350 | 1748) 

In three other sets

• 2x Tile 45° Cut 4 x 4 (Triangle) in Light Bluish Gray (6585110 | 7975)
• 1x Slope 30° 1 x 3 x ⅔ in Light Bluish Gray (6594315 | 7825)
• 4x Slope Curved 2 x 2 x 2/3 in Metallic Silver (6615030 | 15068)
• 2x Tile 2 x 2 with Groove in Metallic Silver (6546141 | 3068b)

• 2x Wedge Plate 4 x 2 Left - Metallic Silver (6617168 | 41770)
• 4x Technic Brick 1 x 2 [1 Pin Hole] in Dark Green (6530046 | 3700)
• 4x Technic Axle and Pin Connector Angled #7 - 168.75° in Light Bluish Gray (6533802 | 4450)
• 3x Tile Round 2 x 2 Half Circle in Light Bluish Gray (6565027 | 5520)
• 1x Slope Curved 2 x 2 with Stud Notch Left in Light Bluish Gray (6507843 | 5095)

Decorations

• 1x Tile 8 x 16 with Bottom Tubes with 'STAR WARS Din Djarin's N-1 Starfighter', Stats print (6614514) 

 

• Sticker Sheet for Set 75442 (10115385/6581519)

I feel like there are a few more stickers than I would have expected to find in a UCS set. While I wouldn't have wanted all these stickers to be translated into prints, I think perhaps at a minimum, the 3x3 round engine feature (the 'turbonic venturi power assimilator' according to Wookiepedia) and the cockpit instrumentation would have been really great parts. I can see that the 'remaining paint' decoration could have been extremely limiting for other uses.

I didn't apply the stickers to my copy of the N-1, so here's one of the official images.

©2026 The LEGO Group

Minifigures

Din Djarin

• 1x Legs with print in Dark Brown (6581498)

These new legs feature knees & boot tips and are only available in two other The Mandalorian & Grogu sets.

Grogu

• 1x Minifig Body, Grogu with Dark Brown Robe Lines print in Sand Green & Dark Tan (6581504)

This is the new body (with the more accurate, high-collared coat design) and this variant has a regular print of the coat without the Beskar rondel shield & mudhorn motif. It is currently only available in one other set, 75444 AT-RT Attack.

I did a little analysis of Grogu's new body in my 75447 Razor Crest review.

High quantities

There are a few pieces coming in high quantities, but I chose to only note parts that are appearing in quantities above 25.

N.B. Some of this review was written before June sets were released. I have tried to check and amend any discrepancy produced by parts appearing in those newest sets but may have missed one or two changes.

• 39x Slope Curved 2 x 2 x 2/3 in Light Bluish Gray (6102357 | 15068)
• 28x Slope Curved 4 x 1 Double with No Studs in Light Bluish Gray (4622803 | 93273)
• 27x Tile Special 1 x 1 with Clip with Rounded Edges in Dark Bluish Gray (6071226, 6344022 | 15712, 44842)
• 26x Plate Special 1 x 2 Rounded with 2 Open Studs in Light Bluish Gray (6248890 | 35480)
• 26x Plate 1 x 1 in Dark Tan (4549436 | 3024)

The build

The set contains 16 bags, and the build gets off to a pretty interesting start. 

The hammerhead nose wings at the front of the ship use a bit of reflected triangle symmetry to create the taper and allow for the curvature for the facing and trailing edges of the shape. We're no strangers to reflected triangles – see Arno Knobbe's brilliant, enlightening article for a deep-dive on this technique.

The shiny nose section uses the majority of the metallic silver parts.

The angle of the front wings has been constructed to create the anhedral (downward slope to increase this fighter's manoeuvrability at speed) and is partially fixed and supported by four Technic ball joints (53585) to keep the angle correct.

A neat stud reversal technique using Mixels joints is employed to create the structure to connect panels that cover the underside of the ship.

 

The tail point is attached using two lances (3849). It's not significantly different from the method used in the smaller-scaled version of the 75325 N-1 from 2022. Here however, it feels much more in scale with the ship overall.

More Mixels joints are buried in the construction too; these are attachments for the tapering mid-section of the fuselage. Note the method of using the quarter circle tiles to allow the joint to pivot slightly where it would otherwise be trapped. In the lower attachments, 'D-SNOT' bricks have been used to allow similar angling of the ball joint where the underside panels will connect.

The basic structure is enormous: from the tin tip to its tail end, it measures 67cm (26 in) long! There's something aquatic about it, calling to mind both stingrays and hammerhead sharks.

The smooth tapering and filleted mid-section body panels have been attached to the side using those Mixel joint attachment points. This allows a better off-grid position at angles in three dimensions, although with this type of streamlined design there is no avoiding some gaps.

The asymmetrical detail of the exposed inner structure, here depicted with super battle droid arms (31785), reinforces that impression of a hammerhead shark by giving this fish gills!

As this version of the N-1 has an intentionally 'renovated' look, the gaps in the body work aren't so much of a concern.

However, some gaps in the model did have me questioning if a closer fit might have been possible, particularly in the interface between the droid housing and the tapering section of the fuselage behind the cockpit.

Four big 6 x 8 slopes (3292) fill in the underside, mostly. It's an effective method to cover the construction, and complete the panels of the fuselage. The result is surprisingly firm but, if you'll forgive me for being critical of something that won't often be seen, I think the big slopes seem a bit... square? These result in some gaps, although thankfully they feel even more justifiable here.

The third, centrally mounted hot-rod engine is a snug fit, however.

Some pleasing greebling and some nice parts usage are employed in creating each of the engines, particularly the Darksaber Easter-egg! 

At the end stage of the building process, I was pleased that the two engines were not quite mirrored.

The finished ship is huge, surprisingly sturdy and mightily impressive. The shiny silver really adds some special sauce to this hot dog.

I didn't mentioned the stand, but its constructionimmediately follows the attachment of the underside panelling, which is the point where it is nice to have somewhere to put the N-1 that doesn't simultaneously occupy all the build space! It's highly effective too, permitting the ship to be placed in all directions for display.

Value and other thoughts

• Price: £229.99 ($249.99 / €249.99 / AU$429.99)
• Price per gram (PPG): 2628g = 8.8p
• Price per piece (PPP): 1809 pieces = 12.7p

The PPG of 8.8p is just a little above what I have come to think of as reasonable, and the PPP supports that “slightly expensive” assessment. However, I don't think it’s all that bad either. Let’s not forget that the finish on the drum lacquered silver parts makes those elements notably more expensive to produce.

With a good selection of those parts appearing for the first time too, I think it's forgivable that the price is a little higher than would be ideal.

We also have three new moulds to account for too, one of which is a pretty big element.

Perhaps my biggest criticism is that I think the windscreen should be a little taller. For practical reasons it's pretty shallow and I have to ask whether an in-scale Mando would fit his helmet beneath that canopy? I certainly think his visibility would be impaired. In terms of LEGO element design though, it does have the neat feature of fitting below a 1x8x2 arch!

Admittedly, this ship is a lot of grey, which to some may be a bit of a turn-off, but there’s some unusual recoloured pieces among those, which will be lovely to have. Prices on the secondary market are a little crazy right now, but those will inevitably calm down if they appear on Pick a Brick (ETA September 2026).

I don't think me being overly critical of the precise shape would be fair; the flow and subtle curvature of the mid-section alone is a highly complex mix of convex and concave shapes that, for the majority of forms, have been depicted in LEGO bricks as well as could be expected. Overall it’s an extremely nice representation.

 
While the set is obviously not at minifigure scale and a brick-built Grogu might look a little odd in the dome behind the cockpit, I am conscious that R5-D4 featured in the droid's port in a later episode of The Mandalorian. While it might have been tricky to achieve at scale without a new 3x3 truncated cone, including R5-D4 would have been the cherry on top.

Conclusion

I was pleased when I saw that the Naboo starship had found a new place in the saga. Even though it's four years later and other versions have been available, to have this ship realised in UCS LEGO form feels like a bit of a treat. 

I know many people have speculated about a yellow recolour of this ship and it had occurred to me to attempt it for this review, however a quick search revealed that my efforts would have been wasted as the inevitable question, "Where Yellow?", has been admirably answered by Anthony Picone's conversion of set 75442 to its appearance in The Phantom Menace.

The metallic silver parts are welcomed and really help lift this model up from being a slab of grey plastic.

It's a fun and varied build resulting in an impressive-looking ship, and the accuracy is pretty good too. Being picky, I have to reiterate my doubts about the height of the canopy in terms of accuracy to the source. There are also some gaps but, in trying to depict such a sinuous form with LEGO elements, I think that was always going to be inevitable.

I'm not sure the stickers would be all that necessary but for the purposes of showing remaining areas of the stripped back yellow paint work. I think that is a further credit to the design of the model that it does work well without them.

I suspect that if you had the budget, many of you will already have picked this up as part of the Star Wars Day deals. If not, and if funds allow, I feel I can recommend the set as producing something a bit different from a typical blocky LEGO Star Wars vehicle, even allowing for the obvious criticism that it's still a grey spaceship!

If you do stop by the official page to buy this beauty, take a moment to watch the fun little video there of Grogu force-building the N-1!

MOC from parts in set 75442: Silver Claws

I wanted to build something that used most of the new metallic silver parts and, having already constructed the egg from my exploration of the new sloped macaroni, my build began from there and quickly morphed into this TIE fighter variant.

With atherestriction of the parts in silver, I found that building a satisfying wing for each side needed some compromises to the normal symmetry of a TIE fighter wing. This led to a crab-claw shape and hence gave this ship its silly name – The Silver Claws – perhaps a vehicle fit for the chrome-clad Captain Phasma?

US$249.99/ £229.99/ 249.99€/ AU$429.99

 

READ MORE: Incredible new parts in the LEGO® Technic 42232 Koenigsegg Sadair's Spear Megacar™ 

 

Help New Elementary keep publishing articles like this. Become a Patron!

A huge thank you to all our patrons for your support, especially our 'Vibrant Coral' tier: London AFOLs, Antonio Serra, Beyond the Brick, Huw Millington, Dave Schefcik, David and Breda Fennell, Gerald Lasser, Baixo LMmodels, Sue Ann Barber and Trevor Clark, Markus Rollbühler, Elspeth De Montes, Megan Lum, Andy Price, Chuck Hagenbuch, Jf, Wayne R. Tyler, Daniel Church, Lukas Kurth (StoneWars), Timo Luehnen, Chris Wight, Jonathan Breidert, Brick Owl, BrickCats, Erin and Dale, Jake Forbes, H.Y. Leung and our newest top-tier patron, Keith Marcelletti! You folks are better than inverted cheese slopes.

All text and images are ©2026 New Elementary unless otherwise attributed.