06 July 2026

Review: 11512 Hanging Golden Pothos from LEGO® Botanicals

Posted by Eero

LEGO® Botanicals theme offers an alternative to people who want to have some greenery in their home but are unable to keep real houseplants alive. Plastic stays green long after we people are long dead – as H.P. Lovecraft said, "that is not dead which can eternal lie"

11512 Hanging Golden Pothos certainly takes the lifelikeness to the maximum, being easily mistaken for a real, living Pothos. Is realism enough to make a great set?


We were given this product by The LEGO Group; the author's opinions are their own.
This article contains affiliate links to LEGO.com; we may get a small commission if you purchase.

11512 Hanging Golden Pothos

Price

Other countries click here

Lego Botanicals 11512 Hanging Golden Pothos

 

 

Interesting parts

Recolours

  • 12x Plant, Leaf/Petal 4 x 6 x 1 1 / 3 with Marbled Lime Tip in Green (6633440 | 7096

Marbled pieces were introduced to LEGO Botanicals theme earlier this year in 11510 Magnolia Branches. I'm glad to see that wasn't an one-off appearance. Here, the marbled effect appears in the same mould but with a new combination of colours. They are beautiful, and universally useful for MOCs with lush greenery. Once again, it reminds me of some LEGO® BIONICLE® sets, for example 8920 Ehlek


  • 8x Bar, Curved U-Shape 2 x 3 in Bright Green (6632933 | 7052

I haven't been able to play with this part very often, but it is promising. Curved bar pieces that allow clips are always useful when building organic shapes.



  • 40x Hinge Cylinder 1 x 3 Locking with 1 Finger and 2 Fingers On Ends, with Hole, 7 Teeth in Bright Green (6632936 | 54662

The finger segment is one of the defining pieces of this set. I'm immediately thinking of Cthulhu with these.


  • 24x Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section in Bright Green (6632937 | 40379

Lovecraftian vibes are also present in these tail – or tentacle – segments. I love that this piece was introduced in the LEGO® Dinosaurs theme in 2001, and still remains in use after some cosmetic mould modifications. 


  • 4x Brick Sloped Corner 6 x 6 x 2 / 3 in White (6632934 | 8034

This piece first appeared in light bluish grey in set 76354 S.H.I.E.L.D. Helicarrier in June, but we haven't been able to analyse it until now. It is also now available in black.


Naturally, a 10x10 dish fits perfectly in the middle of a circle made of four of them.


It is part of the "cheese" family, so the profile matches pieces like the cheese slope (54200, shown in sand blue) and the new convex cheese slope (7826, black on bottom right). The latter combination could make a nice cockpit for a starfighter. 

Overall, the piece has potential in architecture MOCs, including arches, awnings and railings.

Rare parts


The ¼ circle arches are really nice, and it's good to get a bunch of them. They are useful in windows, roof trusses, furniture and so on. The bright green click hinge connections help to attach those aforementioned Lovecraftian appendages. 

The model

The Hanging Golden Pothos doesn't need an external vase or a display table: It has its own "wooden" stand and white pot. 

The instructions offer an alternative with two longer and two shorter creepers, however, I built the uniform version as it is easier to shoot in my photography studio (a.k.a. balcony).  The whole model is symmetrical, or more specifically, consists of four identical quarters. That means it looks the same from almost all plausible angles, and so my review does not have many photos. There is no more to see here, really. It has one total impression, and it looks… pretty much like a real Pothos. 

The set's main issue is that it is not interesting. Flower sets, and for example the recent 11505 Woodland Mushrooms offers new colour combinations and harmonies, interesting piece uses, compositions, contrasts, as you can see in my review of the LEGO mushrooms set. Conversely, 11512 Hanging Golden Pothos looks like a houseplant. It's quite pleasant and well balanced, but I just think that being something that you the hobbyist assembled using a variety of small plastic parts doesn't add much to it.


It seems to be a common complaint in AFOL circles that The LEGO Group makes too many 1:1 real life object sets. I don't generally agree. I think Polaroid cameras or Pac-Man arcade machines are quite interesting when built with LEGO bricks. But this Pothos is not, because essentially it is a very simple thing. The set designers have done a good job on it, but probably the theme's development team could have picked a bit more exciting plant to start with.

What else to say? The stand is nice. The pot is almost seamless, and has the most interesting (if not groundbreaking) techniques in the model. 

Initially, I thought that all the leaves should have been marbled, but to be honest, it could have looked too messy; I like the calmness that regular bright green leaves create here. 


The funniest thing here is that the Pothos's tentacles can carry it, so you can ditch the stand and locate it in your city or castle layout for some authentic Arkham action (minifigures not included). Or maybe the upcoming LEGO® Ideas Godzilla set going to challenge Biollante?


Conclusion

With the astonishing price of US$59.99/ £54.99/ 59.99€/ AU$99.99 for 372 parts (and obviously no minifigures) it is impossible to recommend 11512 Hanging Golden Pothos… except if you are a home decor enthusiast with an expensive taste in plastic house plants. It makes a pretty good parts pack for Lovecraftian horror, and the marbled leaves are nice; nonetheless, any other LEGO Botanicals set is a better deal for the money.


Pre-order available now in Europe

Lego Botanicals 11512 Hanging Golden Pothos

 



READ MORE: Review of set 21066 New York City – The Big Apple

 

Help New Elementary keep publishing articles like this. Become a Patron!

A huge thank you to all our patrons for your support, especially our 'Vibrant Coral' tier: London AFOLs, Antonio Serra, Beyond the Brick, Huw Millington, Dave Schefcik, David and Breda Fennell, Gerald Lasser, Baixo LMmodels, Sue Ann Barber and Trevor Clark, Markus Rollbühler, Elspeth De Montes, Megan Lum, Andy Price, Chuck Hagenbuch, Jf, Wayne R. Tyler, Daniel Church, Lukas Kurth (StoneWars), Timo Luehnen, Chris Wight, Jonathan Breidert, Brick Owl, BrickCats, Erin and Dale, Jake Forbes, H.Y. Leung and our newest top-tier patron, Keith Marcelletti! You folks are better than inverted cheese slopes.

All text and images are ©2026 New Elementary unless otherwise attributed.

7 comments:

  1. I am hoping to use this in a "crazy jungle" sort of way.It will be a psychedelic kind of approach so what the heck. I plan to buy 1 set asap and another on clearance. Wishing myself luck.

    ReplyDelete
  2. 10x10 dish surely?

    ReplyDelete
    Replies
    1. Definitely. The pieces are 6x6 and four of them make a ring with 12x12 total footprint, hence the author's confusion. However the pieces are 1-wide, which removes one module of interior space on each side, so the dish inside must be 10x10. Lego doesn't even make a 12x12 dish anyway.

      Delete
    2. Yes, that's right, of course. Thanks! I'll fix it.

      Delete
  3. Oi vey! $60 for 372 pcs?! No IP excuse, no mfs! My eyes water at the price! My wallet recoils! My heart breaks from betrayal.

    ReplyDelete
    Replies
    1. Yeah, the price point is really disappointing, and honestly quite baffling. With a little under 400 pieces, a price around $40 would be fair. What justification is there for fully 50% more at $60?

      It isn't those fancy marbled leaves, because 11510 Magnolia Branches contains exactly three times as many such pieces and that set released at $50 for 435 pieces, which is still a touch on the high end at 11.5¢/piece, but all those special parts could easily justify a small hike. This new set works out to 16.1¢/piece, which is way too high. What gives? Considering the parts it would be fair enough at perhaps $45, but no higher. It certainly shouldn't cost $10 more than the Magnolia Branches, which has more parts overall.

      It's a shame, because I really want this one, but I can't justify paying that much for it. I guess I'll have to wait and hope it eventually goes on sale.

      Delete
  4. Olympic Brick Thrower7 Jul 2026, 05:06:00

    The hinge cylinders in bright green give me so much nostalgia for the Lego games of the mid 2010s, that’s how every vine or otherwise plant-themed obstacle was constructed back then.

    ReplyDelete