The recently announced 11376 Ford® Model T® from LEGO® Icons depicts Henry Ford’s mass-produced automobile that revolutionised transportation.
.jpeg)
We were given this product early by The LEGO Group; the author's opinions are their own.
This article contains affiliate links to LEGO.com; we may get a small commission if you purchase.
11376 Ford® Model T®
- Release date: 1 March 2026, pre-order available now from the links below
- Pieces: 1060
Price and direct link to pre-order:
- US$ 129.99 on LEGO.com US
- CA$ 169.99 on LEGO.com Canada
- GB£ 119.99 on LEGO.com UK
- AU$ 199.99 on LEGO.com Australia
- NZ$ 229.99 on LEGO.com New Zealand
- DE€ 129,99 on LEGO.com Deutschland
- NL€ 129,99 on LEGO.com Nederland
- FR€ 129,99 on LEGO.com France
- PLN 569.99 on LEGO.com Polska
- NOK 799,90 on LEGO.com Norge
- DKK 1099.95 on LEGO.com Danmark
Background
 |
| Sergey Rodovnichenko via Wikimedia Commons |
The Ford Model T is an automobile that was produced by the Ford Motor Company from 1 October 1908 until 26 May 1927. Henry Ford wanted the Model T to be affordable, simple to operate, and durable. The LEGO set appears to be based on a 1913 Model T Roadster, although Model T were known for their ability to be customised.
.jpeg) | |
| © Ford Motor Company |
Ford is most credited with the thoughtfulness and efficiency of his company’s production assembly line. By transitioning to a “moving” assembly line, Ford was able to cut the production line time down by nearly 10 hours, which in turn led to the cars themselves being more affordable, resulting in higher sales.
The Model T was one of the first mass production vehicles, allowing Ford to achieve his aim of manufacturing the universal car. It seems appropriate to label this an iconic vehicle.
New moulds
.jpeg)
There are four new moulds in the set, if we include the fabric cloth.
Tyre 75 x 13 (7860)
- 4x Tyre 75 x 13 in White (6575457 | 7860)
.jpeg)
- Dish 8 x 8; I've used the 8x8 dish with Umbrella Pattern (6560536) from 21360 Willy Wonka & the Chocolate Factory.
- Plate Special Round 8 x 8 with 2 x 2 Center Studs (6177) shown in dark red above.
Wheel (7877)
There are two other Ø75mm wheel rims in the LEGO inventory, both with a deeper rim – 15.8mm Motorcycle (46334) and 17mm Motorcycle (52051) – but this 13mm rim depth is a new size.
- 4x Wheel 75mm D. x 13 mm in Black (6575789 | 7877)
.jpeg)
The complete wheel and tyre assembly looks great. Not all Model T's had white tyres, and many had brass spokes in the wheels, but this classic combination looks ideal on the model.
Windscreen 9 x 5 with Double Curved Bar (115551)
- 2x Windscreen 9 x 5 in Trans-Clear with Double Curved Bar in Black (6584086 | 115551)
.jpeg)
The windscreen has two 3.18mm transparent bars at either end of the half-plate thick glass portion. The two transparent bars are 9 modules apart.
.jpeg)
The 90 degree curve matches other curves in the LEGO® System, for example:
.jpeg)
Three sides are dual moulded with a black 3.18mm bar border. You can also attach clips on the rounded corners and they stay in place, but I expect it isn't a legal connection.
.jpeg)
When Tom first saw these new windscreen elements, he suggested sci-fi saloon doors as a potential use. One side needs to be offset to make the doors meet in the centre so I used a jumper plate. I can definitely see this idea working.
Cloth, Soft Top (6586353)
- 1x Cloth, Soft Top in Black (6586353)
The soft top is made of a starched fabric and comes pre-folded and pressed in its own little envelope with all the folds correctly maintained. It's a very stiff material and it is prone to creasing when you are attaching it – especially if you try to coax the soft top roof down.
Recolours
.jpeg)
- 4x +1 spare Tile 1 x 1 with Groove in Pearl Gold (6576385 | 3070)
- 2x Brick Curved 2 x 4 x 1 in Dark Bluish Gray (6600112 | 5842)
- 2x Brick Arch 1 x 3 in Reddish Brown (6600113 | 4490)
.jpeg)
- 9x Brick Curved 2 x 4 x 1 in Black (6587076 | 5842)
- 2x Brick Curved 2 x 2 x 1 Curved Top, Corner in Black (6592550 | 5846)
- 2x Slope 30° 1 x 4 x 2/3 in Black (6601521 | 7835)
- 2x Slope Curved 1 x 2 Inverted with 1 x 1 Cutouts in Black (6600029 | 5847)
Let's take a quick look at that last one...
Slope Curved 1 x 2 Inverted with 1 x 1 Cutouts (5847)
.jpeg)
- 2x Slope Curved 1 x 2 Inverted with 1 x 1 Cutouts in Black (6600029 | 5847)
This is a new mould from January 2026 set 71866 Ninja Character Display 15th Anniversary, where it appears in red, but we did not review it.
It is just a one-module wide version of the Slope Curved 2 x 2 Inverted with 1 x 2 Cutouts (1750), allowing the curve to be placed in a smaller space.
New prints
- 1x Tile 1 x 2 with print in Pearl Gold (6615520)
The typeface used is unique to Ford. Childe Harold Wills designed the Ford logo and was also part of the engineering team behind the Ford Model T itself. Wills used his grandfather’s stencil set, which was based on the style of writing taught in schools when Ford was a child, so it reflects Ford's handwriting too.
Rare elements
Coming in one other set currently are:
.jpeg)
- 6 x Brick Arch 1 x 3 x 2, Straight End in Black (6585237 | 5850) also in 75441 Venator-Class Attack Cruiser
- 1 x Technic Steering Wheel Small (3 Studs Diameter) in Dark Orange (6539382 | 2819) also in 10357 Shelby Cobra 427 S/C
In two sets:
.jpeg)
The build
.jpeg)
.jpeg)
The engine sits in the front and, since the Model T was a rear-wheel drive, power is transmitted through a driveshaft. This is represented in the LEGO model but it is not connected, and simply ends by floating behind the dark blue grey 2x2 inverted slope you can see in the centre of the underside.
.jpeg)
One of the fun play features is positioned early on in the build but it is not completed until later. The crank handle slots into the front, but the red rubber band fan belt will remain unconnected until the engine is built.
.jpeg)
Interestingly, the fuel tank sits under the driver's seat in the Model T; a slightly disturbing position in my mind as I always imagine the fuel tank to be a potential source of fire and therefore an explosive risk in a vehicle of any kind.
In the actual Model T, the seat was hinged to allow access to the tank for refuelling, but in the LEGO model, the seat connects into place. Thankfully no fuel is required to drive the LEGO version.
.jpeg)
The rear fenders are built from plates, tiles and the 1 x 5 x 3 1/3 arch brick (5845) . In the actual Model T, the seat was made from leather with a horsehair stuffing for comfort. The pattern of 1x1 tooth tiles (35399) in the LEGO model depicts the typical leather pattern on earlier Model Ts.
.jpeg)
The engine of the Model T had four spark plugs, but there was no battery, since hand-cranking would generate enough current for starting. The inline four cylinder engine could produce 20 horsepower with an impressive top speed of 42mph.
.jpeg)
.jpeg)
The opening mechanism for the bonnet uses two bars with droid arms connected. I'll address one of the techniques used here later. These lift the bonnet sideways out and away to allow the engine to be seen. The gap is enough to see the engine but its not very easy to see the fan rotating as it sits close to the radiator, somewhat hidden from view. It's still a lovely little detail.
.jpeg)
There's no new moulds for the fenders as these ones are all built from plates and tiles. There's some nice angles with bars and clips used to get the shape of the fenders.
.jpeg)
Many of the details from the original vehicle are captured in the LEGO model. On the right, the small carbide generator can be seen on the running board – this was used to power the headlights. The horn uses a pearl gold sextant (30154) to good effect.
A quick note: apologies as I knocked the right light off when taking a photo of the underside and when I popped it back on, I accidentally place it incorrectly twisted by 90 degrees. Both should have the 1x1 studs in pearl gold on the top and bottom of the lights.
.jpeg)
The small dark orange steering wheel (2819) has only been used once before, in 10357 Shelby Cobra 427 S/C and you can read Zach's review of the LEGO Shelby Cobra as a contrasting car also from LEGO® Icons.
The two forks are the control levers: the spark timing on the left and the throttle on the right.
.jpeg)
The soft top frame has three sections which are then covered with the new soft top cloth. It's a little bit fiddly and the frame likes to fold together when the stiff material is attached.
Illegal technique
During the construction of the bars to hold the opening mechanism for the bonnet, an interesting decision was made to use adjacent headlight bricks in a position that is 'illegal' by The LEGO Group's own standards as it stresses the elements.
.jpeg)
The horizontal bars extend from a 1x2 brick with two studs on one side (11211) to attach into the rear of two 1x1 headlight bricks (4070) within the steering block. Since the side stud on the headlight brick extends out beyond the rest of the vertical face of the brick, it means that there's not enough space for them in this position when both the top and bottom are also connected.
.jpeg)
Play features
There are six main play features in the Model T.Opening bonnet
.jpeg)
Crank start
The crank start is a fun play feature that is best enjoyed during the building process as it's tricky to see once the bonnet is on. I've created this little animation of the crank turning the fan belt and the fan, as it's satisfying to play with.
Steering
.jpeg)
Opening turtle deck
.jpeg)
The boot or trunk of the Model T was known as the turtle deck, and in the model, it opens to reveal a small storage area. This is empty but there's space to pop something in there!
Soft-top roof
.jpeg)
The photo above shows the lowest I could get the soft top to go down; it's about 45 degrees at the back but the good thing about lowering the soft top is that the steering wheel is much easier to reach if you want to show off the steering function.
Opening door
.jpeg)
This model of the Model T only has a single opening door on the passenger side, which reflects Henry Ford's thinking about the actual early Model T cars. Early American Ford Model T open-car models (roughly 1913–1925) featured a single, functional passenger-side door because the driver’s side was sealed to save on production costs, increase body rigidity, and ensure safer exit onto the pavement rather than into traffic.
Final model
The final model is a good-looking antique vehicle and very much recognisable as a Ford Model T..jpeg)
.jpeg)
.jpeg)
.jpeg)
A note on colour
Henry Ford famously said, "Any customer can have a car painted any colour that he wants so long as it is black". This quote, often shortened to "You can have any colour you like as long as it's black," was published in his 1922 autobiography, My Life and Work.
That quote didn't apply to the entire production of the Model T, and was actually only implemented from approximately 1914 to 1925. Model Ts were available in other colours before and after that. Black wasn't even an option before 1914, unless you specially ordered it. Having said that, the quote is so famous now, and black such a common colour across the Model T entire production run, that it makes sense to have a black LEGO Model T.
Conclusion
I think that this set is a great antidote to the traffic jam of muscle or racing cars we have seen within LEGO themes so far. The Ford Model T really was a remarkable vehicle in terms of revolutionising automobile transportation and production efficiency. Building this set and reading more about the Model T and Henry Ford, even the little tidbits of information within the instructions, was certainly more interesting than I had anticipated.
.jpeg)
There's a couple of relatively minor issues; the frame for the soft top is prone to retracting back from the windscreen, the soft top likes to retain creases, the best play feature is a little hard to see on the finished model and then there's the illegal building technique. The latter is not a huge issue in the short term, and whether it will be a longer term issue for those bricks under stress remains to be seen.
The new moulds are great. I really liked the new windscreen and I think they have potential beyond the set. The new wheels and tyres are also nice additions, both for the set and for wider use.
I liked all the details included to capture some of the vintage style of the Model T: the steering wheel, the three pedals, the lamps, the basic engine structure and the fenders. It's a bonus to have quite a few play features, although the floating rear axle is a little odd.
Overall as someone who is not car-obsessed, I found this pretty set to be fun to build and a very interesting topic to learn more about. The Model T does have some studs on show, but I am a fan of the use of studs here as I feel it this reflects the vintage style.
Price-wise, with 1060 pieces and an RRP of £119.99/ $129.99/ 129,99€, this gives a price per piece of 11.3p /12.3c/ 12.3c. It's certainly on the higher side, sadly, but perhaps those four new moulds will make it worthwhile – and for fans of vintage cars, it will certainly be desirable even if there's not a discount to ease the cost.
READ MORE: Revealed: 40507 I ♥ Billund is the Exclusive 2026 set from LEGO® House
Help New Elementary keep publishing articles like this. Become a Patron!
A huge thank you to all our patrons for your support, especially our 'Vibrant Coral' tier: London AFOLs, Antonio Serra, Beyond the Brick, Huw Millington, Dave Schefcik, David and Breda Fennell, Gerald Lasser, Baixo LMmodels, Sue Ann Barber and Trevor Clark, Markus Rollbühler, Elspeth De Montes, Megan Lum, Andy Price, Chuck Hagenbuch, Jf, Wayne R. Tyler, Daniel Church, Lukas Kurth (StoneWars), Timo Luehnen, Chris Wight, Jonathan Breidert, Brick Owl, BrickCats, Erin and Dale, Thunderdave, Jake Forbes, H.Y. Leung and our newest top-tier patron, Keith Marcelletti! You folks are better than inverted cheese slopes.
All text and images are ©2026 New Elementary unless otherwise attributed.
Where is the 1x1 Pearl Gold Tile recolour? It's an incredibly exciting one and I don't see it here :)
ReplyDeleteFirst recolour mentioned in the Recoliur section.
DeleteQuite surprising that it took until 2026 to get pearl gold 1x1 tile, isn't it? Especially considering that we've had metallic gold 1x1 tile since 2019. I guess that filled the niche for most uses until now, but it's odd that we got full metallic seven years before pearl, as usually it's the other way around.
DeleteQuite surprising that such a clearly illegal technique would make it all the way to production of an official set like this. Why the designer didn't just use a 1x2 Technic brick with 2 holes (part 32000) is beyond me. While that solution would technically introduce a very tiny 0.12 mm vertical offset, as Technic holes are ever so slightly higher than SNOT stud position, surely this would create entirely negligible stress over the long 8L distance that those bars run. It would certainly be many times better a solution than the decidedly problematic front-to-back headlights that were employed instead.
ReplyDeleteBut for what should be a properly legal solution, you could simply turn those two headlight bricks around, where they will meet flush back-to-back, and slap a bottle topper piece (part 31561) on each SNOT stud. Then, switch out the double-studded 2L bar pieces with lightsaber hilts (part 64567) which are half a plate shorter, allowing just enough room for the plate-thick bottle topper inset half a plate into the front of the headlight brick.
Finally, you could simply use a different arrangement of bars to bridge that 8L distance, and connect a free bar end straight into the front of that same headlight brick. Swapping out the 6L bar for a pair of 3L bars (or, alternatively, a 4L and a 2L, which I think looks a little cooler) with the double-studded 2L bar connecting them in the middle, fits perfectly.