24 August 2021

Rubber Band Holders Parts Festival – Mitch Henry's MOCs

Mitch Henry (CZQ on Flickr) completes our Forbidden Elementary Parts Festival today which, as its seed parts, uses the 3 weird LEGO® pieces that rubber bands used to come on back in the 2000s.


Growing up, Bionicle was always my favorite LEGO® theme. The characters were fun, the world was mysterious and intriguing, and of course, the parts were unlike any other LEGO elements I’d seen before. My first Bionicle set was 8573 Nuhvok-Kal, part of the Bohrok-Kal subtheme. The Bohrok are considered by many to be the peak of Bionicle; appealing design and multiple play features made them very popular.

One play feature was pushing a lever on the back to flick its head forward. To make the head return to its resting position the sets included a rubber band. Naturally, this means each Bohrok came with a rubber band holder as well. When I was approached for this parts festival I had just picked up a lot with all 6 original Bohrok, so I was eager to participate.

I own two of the three types of rubber band holders: the small standard variant (Rubber Band/Belt Holder 2 x 4 x 2 ⅓ - 41752) and the large standard variant (Rubber Band / Belt Holder 2 x 6 x 2 ⅓ - 41753) in both dark grey and dark bluish grey.

Robot


As a lifelong Bionicle fan I knew I had to make at least one humanoid robot. For this MOC I wanted to do a 'partspam' build since that’s not something I usually do. What resulted is this bowlegged mechanical monstrosity. This is also my only parts fest MOC to use the longer variant.

Though it doesn’t have quite the same texture, the Pullback Motor 5x6x3 12787c01 for the head matches the aesthetics of the rubber band holder well and helps to add a nice splash of color. 

Silhouette is an important part of the character design process (and one that I prioritize highly) so I wanted that long-and-limber look of the stacked rubber band holders to continue through the whole MOC. The torso and arms were kept as thin as possible to keep things consistent. Hose, Ribbed 7mm D. 11L 78c11 not only accentuate the stylized proportions but also provide some extra stability to the whole MOC.

Powerup

Next up is a piece of LEGO tech inspired by the powerups from Nintendo’s Metroid series. 


Here, the rubber band holders are purely functional. The legs of the MOC are attached to the body by a tri-axle part, Rahkshi backs, and Technic liftarms but they don’t lay flat on their own. The rubber band holder has enough wiggle room to allow the MOC to sit flat on the ground. 

This MOC was built as part of a small collaboration with my friend Grayson M. Between the two of us we created 4 total powerups. Check out his page for the creative part usage that he came up with.

T-shirt screen-print drying machine

While I was looking at the rubber band holder I couldn’t stop thinking about the texture on the top and bottom of the piece. It’s unlike anything else LEGO has ever produced and the soft plastic used to make the part adds to its unique look. 


I decided to repeat the element to create a conveyor belt for a T-shirt screen-print drying machine, something I became all too familiar with for a time.

The rubber band holder has unusual dimensions so building around it (especially as an inexperienced system builder) proved to be a bit of a challenge. When lined up next to each other, there’s enough space for a technic liftarm between two rubber band holders. Using 1x2 bricks with 2 pinholes stacked with 1x6 plates I lined up a handful of the parts and the texture flowed seamlessly. There’s some empty space on the sides that’s too small to be covered with a 2x2 plate so I substituted a 1x2 with groove instead. At about 5 bricks high at a minimum, it may not be the most efficient technique, but for a large-scale city build the rubber band holder may be just what you need.

READ MORE: See what James Kavanagh built using the rubber band holders

Help New Elementary keep publishing articles like this. Become a Patron!

Massive thanks go to our 'Vibrant Coral' patrons: Chuck Hagenbuch, Joe Fontana, Elspeth De Montes, Megan Lum, Markus Rollbühler, Mevits Bricks, Font Review Journal, Baixo LMmodels, Andy Price, Anthony Wright, Chris Cook, London AFOLs, Gerald Lasser, Big B Bricks, Dave Schefcik, David and Breda Fennell, Huw Millington, Neil Crosby, Antonio Serra, Beyond the Brick, Sue Ann Barber & Trevor Clark, and Kevin Gascoigne. Vale Iain Adams, a great supporter of New Elementary.

LEGO® Shop at Home
USA: Save up to 30%. See what's on sale!
UK: Free delivery when you spend £50 or more at LEGO!
Australia: Discover the latest promotions and offers on LEGO.com

All text and images are © New Elementary unless otherwise attributed.

7 comments:

  1. "The Bohrok are considered by many to be the peak of Bionicle; appealing design and multiple play features made them very popular. "

    Correct.

    ReplyDelete
  2. Curious. What is that blue cylinder piece used in the powerup moc? It looks to be the canisters from Meltdown but lacking the pin hole connections on the side

    ReplyDelete
    Replies
    1. No idea myself, but someone on insta mentioned being impressed by 'the integration of the bionicle kraata cylinder box' - might it be that?

      Delete
    2. The Kraata cylinder lid is the silver piece just above the tank treads. I'm afraid I haven't seen those blue cylinders before either.

      Delete
    3. I looked a long time for those cylinders. It looks like they are actually two different parts that telescope within each other? I tried looking at all manner of Belleville, Znap, and gear (like pens or something else). I still don't know what they are, but I found some other interesting stuff along the way!

      Delete
    4. OK friends, I can report that it is NOT a Lego part, according to the creator. Comment from flickr:

      "The trans orange cylinders are from the Invasion From Below series of Hero Factory. The blue cylinder halves I honestly have no idea but they're not LEGO. I found them in a bin at Brickfair and I thought they looked like they could be useful."

      Delete