Blast off with Elspeth De Montes as she reviews the latest LEGO® Ideas set. Elspeth examines all the new interesting and printed pieces that come in this enormous set, and then describes cool techniques used in the build process.
LEGO Ideas set No.17, 21309 NASA Apollo Saturn V has finally landed after a fairly lengthy wait in production orbit. The original fan designers Felix Stiessen (saabfan) and Valérie Roche (whatsuptoday) submitted their version of the Apollo 11 Mission Model to the LEGO Ideas platform back in August 2014 and achieved the required 10,000 supporters by November 2015. After passing review in June 2016, the final set is due in stores on 1 June 2017, with 1969 parts (a perfectly calculated number to reflect the year of man’s first steps on the moon) and a price tag of US$119.99/£109.99/119.99€. This is the largest set to be released within the Ideas theme to date, both in terms of part count and the model’s impressive 100cm final height... or length.
In the BoxThe 1969 elements are spread across 12 numbered bags. I think this is the first time an Ideas set has used numbered bags and it is a good idea given the number of parts.
Mike Psiaki, Carl Thomas Merriam and Austin William Carlson.
New ElementsThere are no new element moulds in this set, but there are five elements that appear in a new colour for the first time. I thought I would do something slightly different this time by highlighting each new element and then show how it was used in the set.
PLATE Ø63.84 W. 4 KNOBSThere is one 8x8 round tile in Earth Blue [TLG]/ Dark Blue [BL] (Element ID 6200046 | Design ID 6177) in this set and it forms the base of the Command Module that contained the crew when they returned back home to Earth. Since it landed on water, I imagine this element represents the dark colour of the ocean.
Link 1M Fric/Fork/StumpfEight of the Link 1M Friction Fork are supplied in Bright Orange/ Orange (6200047 | 30554) and are also used in the Landed Command Module section of the set. As shown above, they depict the inflatable raft that encircles the command module itself. It is not fixed in position, but simply slides over the cone and is a tight enough fit to sit neatly in place.
Lattice Wall 1X6X5There are six of these supporting elements supplied in Bright Blue/ Blue (61866296 | 64448) and they form the stands that allow the model to rest safely on its side in a horizontal position.
TubThere are five tubs in Titanium Metallic / Pearl Dark Grey (6197966 | 64951) in this set and it is a fantastic recolour for their purpose (as part of the F1 engines that powered the first stage of the launch to lift the rocket 42 miles up). The tub element has an axle hole through the base (there is also another similar element with no axle hole) and was previously made available in Reddish Brown, Medium Lavender and Medium Nougat so this metallic version is a great addition for builders.
Bracelet Upper PartThe final new recolour, the 1x1 flower in Medium Stone Grey/ Light Bluish Gray (6182167 | 33291) will be popular with all the ‘Spacers’ out there who love their bley parts. I have been collecting the various colours of this element so I was pleased to see another to add to my collection. It will be useful for a flower in a monochrome scene too I guess…
It is often seen as a flower or vegetation part, but the Saturn V model uses four of these elements for the detailing on the Apollo Service Module portion of the build. A spare is supplied.
nipple’ are both relatively recent elements that may be new to some New E readers and indeed this mould is still new — only introduced in 2016 — while the Black Fez is a blast from the past.
Plate 1X1 W/3.2 Shaft/1.5 HoleThis appears in Black (6167933 | 20482) in four other sets at present: one in 10255 Assembly Square, one in 76080 Ayesha’s Revenge, two in 75524 Chirrut Îmwe (currently on discount from Amazon USA) and two in 75878 Bugatti Chiron. Seven are used in this set and a spare brings the total count to eight.
The White version (Element ID 6178492) appears in only one other set at present, LEGO Minifigures Series 17 #14 Dance Instructor, as the lid on her sports bottle. Four are used in this set and a spare brings the total count to five.
As well as Black and White this element also appears in Transparent, Warm Gold/Pearl Gold and Reddish Brown. The rarest of these other colours is definitely Reddish Brown (6162975) as it only appears in three sets; one in 71258 E.T., one in 70625 Samurai VXL and two in 41185 Magic Rescue from the Goblin Village.
Back to the rocket. Both the Black and White versions of the ‘nipple’ are used in the same manner in the build, mainly during the construction of S-IC STAGE near the base of the rocket. Between the panels of 6-stud wide curves, a ‘tower’ of Black and White 1x1 round bricks (Design ID 3062) helps complete the curve to give a cylindrical shape. At the end tower, the ‘nipple’ is used to connect the tower to the Plate 1X2 w. Hole Ø 4.8 (11458) and at the top a Black Cone 1X1 Inverted w. shaft (11610) is held in place with a Plate 1X1 W. Up Right Holder ‘clip’ (15712).
FezAlthough the Element ID has changed, the Black Fez (Element ID 6203937 | Design ID 85975) in this set is the same as the old one (Element ID 4619597) that only appeared in one set, LEGO Minifigures Series 4 #11 Soccer Player, as the trophy’s base. This element became rather pricey on the secondary market after the Arvo Brothers used four of these for their Alien Project.
Saturn V has no stickers, thus supplying a nice selection of printed parts. There are 16 of the relatively new mould Brick W/Half Bow 2X3 W/Cut (Design ID 24309) in White, printed with four sets of U, S & A lettering and the American flag. These are used in S-IC Stage.
Within the S-II Stage, four sets of White 1x6 tiles are printed with red UNITED (Element ID 6199652) and STATES (6199662). One White 1x8 tile is printed with a dashed black line (Element ID 6201676).
The Landed Command Module has a hatch and technology gadgetry printed on the side of the Dark Stone Grey/ Dark Bluish Gray Rocket Step 4X4X2 (Element ID 6199823).
These three printed elements all form part of the Lunar Landing Module. The Landing Module’s hatch is printed on a Medium Stone Grey Slide Shoe Round 2X2 (Element ID 6199828). Finally, there is an American flag printed on a Transparent / Trans-Clear 1x2 tile (Element ID 6199664).
The actual Apollo Saturn V rocket was 111m in height. The LEGO Ideas version is approximately 1:100 scale, which means that the trophy statuette astronaut figures are close in terms of scale (albeit with their little stands and the general fudge-factor relating to LEGO figures and their odd short and fat proportions). A comparison of minifigure, microfig and the trophy statuette shows the relative sizes and proportions.
The three astronaut microfigures supplied (plus one spare) represent Neil Armstrong, Buzz Aldrin and Michael Collins who flew in Apollo 11. Please note that while I generously allowed Michael Collins to stand on the Moon in the image of the Lunar Landing Module above, in reality he watched from the Command Module in orbit above the lunar surface. These microfigures are incredibly detailed with their intricate space suit print and the gold visor on the front of the head. There is no back printing and all the figures are identical.
Don't want spoilers about the build process? Stop now and read about our competition instead!
Curvaceously CraftedIt is clear from the first stage of the build that this is no ordinary set. While a rocket may well be a cylindrical shape, there is a huge amount of SNOT involved in every stage of the build. The internal scaffolding uses Wall Element 4X4X6, Round (Design ID 30562) but this is all hidden when the beautiful outer rendering is applied.
The first part to be built is the S-IC Stage of the rocket using the panels that sit, offset, upon brackets that themselves sit up on a single Round Plate 1x1 (6141).
Once the inner scaffolding has been built, all the outer panels of curved slopes are ingeniously fitted to completely cover this complex inner scaffolding. The central area where the Warm Gold telescopes radiate is a joy to build and their purpose becomes clear when the back of the panels’ plates attach to the end of the telescope centrally. Ooooo... ahhhhhhhh!
The gaps are then filled by attaching small brick-built sections onto the inner Plate 1X2 W. Vertical Grip, which is new in Bright Yellow/ Yellow (6171814 | 92280) for 2017, so far only appearing in 60144 Race Plane (currently discounted at Amazon US).
Another method for creating the curves is utilised in S-IVB Stage when the designers use Mixels joints to get the correct angle - genius!
S-II Stage separates from S-IC Stage easily as the connection is simply bars and clips and the same process is used to separate S-IVB from S-II. You can see the simple connection of Dark Stone Grey Plate 1X2 W/Fork/Vertical/End (4210884 | 44302) at the base of S-IVB Stage attaches to Bright Red Plate 2X1 W/Holder,Vertical (4534648 | 63868) at the top of S-II stage, This connection is both solid and easily disconnected to allow the set to split in the same manner as the real Saturn V.
Final ThoughtsFrom a New Elementary point of view, this set is not remarkable in terms of new parts although there are a few new colours of interest. Saturn V is amazing to build and has some fantastic techniques that are all hidden when the model is finished. The ease of separation of each stage to allow play is a testament to the skilled scaffolding underneath the outer covering of the model. I found myself thinking “Whhaaaaat, this is mad and brilliant...” as some of the techniques were so unexpected for me. For example this was the first time I have seen a connection using the Plate 1X2 W. Vertical Schaft (88072) easily spotted, as it is green in the build.
It’s fun, it looks amazing and it is playable and it’s a rocket!!! Plus this build is SOLID, I was carrying it around, taking it outside and generally not being gentle, and it stayed together perfectly! (I am 162cm if that helps with scale).
My recommendation: buy it… build it!
|Donate an amount of your choosing to help keep New Elementary publishing great articles about LEGO pieces. Why am I asking for money? Read more here.|
|BrickLink, the world's biggest LEGO marketplace has all the parts and sets you need. Please follow any link from New Elementary to BrickLink before you buy!|
Amazon USA: Amazon.com Canada: Amazon.ca UK: Amazon.co.uk Deutschland: Amazon.de
Products mentioned in this post were kindly supplied by the LEGO® Group. All content represents the opinions of New Elementary authors and not the LEGO Group.