15 November 2024

2024 Skærbæk workshop and After-Party Fest: introducing the elements

Posted by Tom Loftus

New Elementary ran a building workshop at Skærbæk Fan Weekend in September 2024. During the event, attendees were tasked with making something using 10 elements released in the last 12 months as seed parts; we will show you some of the results in due course, but first up, it's our turn! We rounded up some of the reclaimed seed parts from the workshop to run one of our "parts festivals", and dispatched them to a couple of our regular contributors: Kev Levell and Caz Mockett, and one of the workshop attendees, Nathan Don as a guest builder.

10 different lego parts released in 2024

So, welcome to After-PartyFest! For our first instalment, Tom Loftus introduces all 10 elements and to take a closer look at those that have escaped New Elementary's analytical eye so far. 

This article contains affiliate links to LEGO.com; we may get a small commission if you purchase.

The seed parts

Let's kick off with a couple of bar-based elements that would've felt right at home way back in New E's 2016 parts fest The New Black

2 black lego pieces

4 x 6 Technic Wishbone with Axle Connectors and Ball Socket (part 5294)

Still exclusive to set 10330 McLaren MP4/4 & Ayrton Senna where it comes in Black (6464609), this element's peculiar blend of LEGO® System and Technic System has a wealth of connection points to exploit. See Zach's review of set 10330 for a comprehensive look at its geometry.

2 x 2 Plate with Horizontal Bar Underneath (5066)

First spotted in the January LEGO® Friends wave, this special plate has proven its versatility, having appeared in 31 sets so far. In addition to Black (6488003), it also comes in Dark Bluish Gray (6457961), Bright Light Orange (6484950) and most recently Tan (6518050).

Search PaB for
element 6464609
Lego element 6464609
Search PaB for
part 5066
Lego element 6488003


Our next elemental duo come in Sand Blue from the LEGO® NINJAGO® theme, specifically set 71810 Young Dragon Riyu:

2 sand blue highly detailed lego pieces

Creature Body Part, Dragon Wing 11 x 6 with 3 Bar Handles (4899)

The latest in LEGO® dragon wing technology, aside from Sand Blue (6510124) it also comes in 3 dual-moulded colour combinations: Trans-Yellow (6510123), Trans-Orange (6510121) and Trans-Light Blue (6510122).

Cockpit / Large Figure Cover, Ridged, 4 x 5 x 2 with Bar and 4 Studs on Sides (4986)

One of many Ninjago-centric parts, the armour shell is used across the theme, from mechs to dragons to even bigger dragons. It, too, comes in Sand Blue (6475208) and 3 other colours: Pearl Gold (6466418), Red (6466698) and Black (6466417). For more on this part and its connection points, see Toby's reviews of mech sets 71806, 71807 & 71808.

Search PaB for
part 4899
Lego element 6510124
Search PaB for
part 4986
Lego element 6475208


Next up, we're walking in the air:

2 white lego pieces

Plate Special 2 x 3 with Rounded Cloud Edge and 2 Studs (5518)

As noted by Caz in her review of 80058 Celestial Pagoda, the "half-cloud" tile comes in two colours: White (6513938) and Pearl Gold (6513937). For a time it was exclusive to the LEGO® Monkie Kid™ theme but two have since been spotted adorning the roof in 21353 The Botanical Garden. Perhaps because it debuted in such a visually dynamic theme, it seems to have flown under many people's radar - in other words, the perfect candidate for a parts fest!

Mini-doll Platform Soles / Shoes (5107) 

It's shocking the citizens of Heartlake City have just three platform shoe colours to choose from: White (6472137), Pearl Gold (6473569) and Dark Purple (6458990). 

Like the cloud tile, the New E team are yet to take an in-depth look at this funky mould. I'm reliably informed that Kev's After-PartyFest instalment will set that right though.  

Search PaB for
part 5518
Lego element 6513938
Search PaB for
part 5107
Lego element 6472137

An unlikely trio of Tan parts next:

3 tan lego pieces

Flag Triangle 2 x 4 (5555) 

Debuting in the LEGO Friends line in Tan (6475813), the new flag may only have a couple of connection points, but holds a lot of potential. Also available in Red (6511983) courtesy of 10370 Poinsettia, hopefully it won't be long before they're recoloured in other shades too. See Toby's Adventure Camp sets review for some thorough examination. 

Minifig Hipwear, Fluffy Squirrel Tail (5386)

As one of the most specialised elements in our line-up, it's no surprise that the workshop attendees and our Parts Fest contributors say the squirrel tail is a tough element to work with. It's only appearance so far, and potentially ever, is in Tan (6468834) in LEGO® Animal Crossing™ set 77048 Kapp'n's Island Boat Tour.

Foot (Donkey Kong), 4 Toes with Hinge Finger (3560)

Although its connection points are more plentiful, Donkey Kong's foot is similarly theme-specific. It appeared in Tan (6433371) in two 2023 LEGO® Super Mario sets: 71425 Diddy Kong's Mine Cart Ride Expansion Set and 71424 Donkey Kong's Tree House.

Search PaB for
part 5555
Lego element 6475813
Search PaB for
element 6468834
Lego element 6468834
Search PaB for
element 6433371
Lego element 6433371


Plant, Banana Peel with Bar (5215) 

Our final element serves as an unintentional cross-promotion for our Mind that Banana contest because, you guessed it, it's a banana!

yellow lego banana peel pieces

Available in Yellow (6464535) in 6 sets, the banana peel is also now available in Green (6517199) thanks to LEGO® Ideas 21353 The Botanical Garden. Its most common use is simply for comedic effect in superhero sets.


Tom's tablescraps

So there you have it: 10 weird and wonderful elements for our Parts Fest contributors to make some weird and wonderful things. 

We'll share the results of the efforts over the next few weeks but for now, let's take a closer look at some elements on the list that have so far eluded in-depth analysis here at New E.

Techniques using LEGO part 5066

three quarter view and side view comparing 2 lego pieces which are different sizes and shapes but both have studs on the top and underneath, a bar fixed in parallel to the surface of the plate above

2 x 2 Plate with Horizontal Bar Underneath is something of a compatibility upgrade to the rectangular minifig shield (30166) from 2018. There's a lot of shared DNA between the two but the newer plate's smaller footprint, 2 anti-studs and uncapped bar ends make it a more versatile choice for structural points. 


2 images comparing the new part with the 1970s hinge bricks

Another close relative is the 2 x 2 Hinge Brick Top Plate (6134) with its four studs and a similar bar-based pivot point - demonstrated here by its 1x2 counterpart (3938) and lower half (3937). All beloved parts, but the hinge itself feels a bit... antiquated by modern standards? I'll be the last in line to lobby for their retirement but still, it is nice to have a sturdier, if bulkier, alternative for some situations.


lego techniques using 2 x 2 Plate with Horizontal Bar Underneath (part 5066).

Here's a few explorations: first some basic clip and plate combos, then a look at how brackets sit neatly in the half-plate gaps, and finally, a few examples of half-module offsets. I must keep the latter logged for future use, as jumps of half a module can be a weak point in my builds.

Geometry of LEGO part 3560

image comparing the lego donkey kong foot to a simialr construction of a 2x2 plate topped by a 2x2 plate with vertical click-hinge connection.

Donkey Kong's foot is kind of like a beefed-up version of the 2 x 2 Hinge Plate (53968, 92582), with a few embellishments (a.k.a. toes). Both sport a click hinge finger (which is ironic), roughly on a 2 x 2 module footprint – a term that's a little more literal in the case of this element.


2 images of the underside of the lego donkey kong foot showing how other lego pieces can be attached, or simply shoved into the recess beneath the toes. The second image looks like crazy faces bearing teeth with googly eyes.

The heel's rear curvature is a match for a 1 x 2 rounded plate, while a "nail-rail" underside makes it an honorary member of the jumper family. 

The recess under the toes is the strangest feature. It permits the (clearly illegal) insertion of a 1 x 1 round plate with relative ease or, with a great deal more persuasion, two round elements – perfect for these crazy-looking stone-carved heads.


Here's some attempts to nest the foot amongst existing parts:

combinations of other lego pieces alongside donkey kong feet. The first images shows the curved edge either side of the toes is similar to curved lego pieces that have a 1-stud wide radius. The second image shows that the curves at the rear of the heel perfectly match lego pieces where the curve has a diameter of 1 stud.

Rounded elements of 2-module diameter follow the side curvature of the toes fairly well, and a 1-module radius arch brick hugs the heel curves perfectly. 


Lego donkey kong feet lined up alongside one another. They can be connected together under the heel by coupling with rounded 1x2 plates, allowing the wider toe end to create an arc.

The element's splayed toes force a row of feet into a gradual arc. That was a weird sentence, but the technique is potentially useful for ornate archways or the basis for another section of an architectural build.

Squirrel Tail (5386)

image showing a minifigure correctly wearing the squirrel tail as intended, along with 3 other possible connections using non-minifig building elements instead.

As the element with the fewest connection points on our list, I felt the need to explore alternative ways to connect the squirrel tail. 
  • The least-illegal method I found is to sandwich it using bars; similar to the intended configuration between a minifigure's legs and torso. 
  • Candlesticks (37762) flex the element by an alarming amount.
  • Bar connectors (23443, 49755) aren't too bad.


lego squirrel tail with the flexible rectangular end with square holes (that attaches to the minifig) shoved into the semicircular fhollow recess of a macaroni tube piece of 2 studs diameter.

Fortunately, the tail's rubbery material means even fiendish connections like this don't seem to inflict any serious long term damage.


2 images of a minifig wearing the rounded, recessed squirrel tail section of the  piece on the wrong parts of its body. The first has them covering its hands, the second has one instead of a head.

The same can't be said for these two assemblies, which are rather harsh on the poor squirrel's disembodied tail. Perhaps that's just as well because they're not especially convincing as boxing gloves or as an alien head anyway.

Plate with Cloud Tile Edge (5518)

the new lego 2x3 cloud piece compared to other rounded lego parts, or those with a reduced number of studs.

Looking at similar elements, we find part 5518 is a bridge between decorative parts like its full-cloud cousin (35470, above lower right) and more utilitarian parts like the no-frills 2 x 2 tile with two studs (33909, above left). I also feel it has some intangible kinship with Modified 2 x 3 with Hole (3176, above top centre) even though their similarities are virtually non-existent. 


underside of the  2x2 cloud piece showing that its one curved edge, which comprises of 3 curves that have a 1-stud diameter, matches other lego parts with a 1-stud diameter like the 1x1 and 1x2 rounded plates.

A look at the underside of the half-cloud reveals its protrusions line up with existing radii, just as you'd expect. 


a stack of lego half-cloud tiles, and half-cloud tiles laid side by side in multiple, offset rows like roof tiles

Connecting multiple tiles in different configurations leads to some neat effects. A basic stack could become a nice architectural or sci-fi detail, while an overlapped pattern with some 1x2 rounded tiles makes a great roof – gingerbread house anyone?

However, it's not just a decorative element. Here's a few tablescraps exploring some possibly useful practical applications:

10 different ways to attach the Plate Special 2 x 3 with Rounded Cloud Edge and 2 Studs with other lego parts. Many are based upon the fact that the protruding middle curve of the cloud in centred on what would be a tube underside (also known as the antistud). Others are based upon the triple-curved edge being able to align to a a 90 degree angle, set at 45 degrees.

My favourite of the bunch is pictured in the centre – the half-cloud's curved edges fit perfectly (and legally) into a 90° corner, locking the element at 45°. The cross made with 4 half-clouds (bottom left) uses the same principle, with the 4 attached to a 2 x 2 plate at 45°. There's a small amount of give in the connection, but I remain keen to find a use for it. 

Again, the same principle means you can attach 3 half-clouds to a SNOT brick with studs on multiple sides (above, in lime) for a nice effect.


tetrahedral lego creation using the half-cloud plate

Combining four copies of the SNOT brick combo makes a tetrahedron – satisfying to look at, but probably not all that useful.


My final pair of tablescraps take advantage of the cloud tile's projected anti-stud for some funky angle-work:

2 lego techniques using the ability of Plate with Cloud Tile Edge (part 5518) to be set at a non-fixed angle.

The first forms an angle of approximately 53° (as dictated by the butted-up cloud tiles) with cheese slopes to close the gap. The other is based on a 3x4x5 golden triangle. Here the cloud tiles provide a compact way to jump the centre of the 4 module-long section by half a module. 

It's doubtful a situation that requires either technique will ever arise but it's fun to experiment all the same – in fact there really should be an entire blog dedicated to such things... Oh wait.

Closing thoughts

With newfound appreciation for these 2024 parts (and one 2023 interloper), I can't wait to see what the other contributors have waiting in the wings. 

Let the After-Party Fest begin!

READ MORE: Now see what Kev made for After-Party Fest

Help New Elementary keep publishing articles like this. Become a Patron!

A huge thank you to all our patrons for your support, especially our 'Vibrant Coral' tier: London AFOLs, Antonio Serra, Beyond the Brick, Huw Millington, Dave Schefcik, David and Breda Fennell, Gerald Lasser, Baixo LMmodels, Sue Ann Barber and Trevor Clark, Markus Rollbühler, Elspeth De Montes, Megan Lum, Andy Price, Chuck Hagenbuch, Jf, Wayne R. Tyler, Daniel Church, Lukas Kurth (StoneWars), Timo Luehnen, Chris Wight, Jonathan Breidert, Brick Owl and our newest top-tier patron, BrickCats! You folks are just the cutest little baby bows.

All text and images are ©2024 New Elementary unless otherwise attributed.

2 comments:

  1. The "nail rail" on Donkey Kong's feet is a great feature of the part, that allows for greater compatibility with the Mario sets. DK's footprint may be five studs wide in comparison to the "digi-figs'" four-stud footprint, but thanks to the nail rail they can stand on similar platforms (for instance, the seat of next year's 72033 Donkey Kong and DK Jumbo).

    If you're still interested in the squirrel tail part you'll be pleased to know that it will be appearing in Dark Red in 77054 Leif's Caravan and Garden Shop next year!

    Finally, I love the techniques you came up with for the "half-cloud" plate! The use of it for a fixed 45 degree angle is an inspired functional use of a mostly decorative part, and the use of it as a layered roof tile looks amazing.

    ReplyDelete
    Replies
    1. Agreed on the 45 deg corner, I've often wished the 2x3 pentagonal tile would work this way. I bet we'll see this use in an official model in the near future.

      Delete