11 September 2023

LEGO® Star Wars™ parts review: 75355 X-Wing Starfighter™

Posted by Tom Loftus

The latest addition to the LEGO® Star Wars™ Ultimate Collector Series arrived in May bringing with it a selection of new moulds and recolours. We might be a little late to the party, but felt there were parts and building techniques still worthy of analysis.

 

Products in this article were provided by LEGO®; the author's opinions are their own.
LEGO® Star Wars™ 75355 X-Wing Starfighter
US$239.99/ £209.99/ 239.99€/ AU$369.99
1953 parts
May 2023
Buying from LEGO.com? Please consider using our affiliate links, we may get a commission: USA LEGO Shop | Australia LEGO Shop | UK LEGO Shop.

New moulds

3x3x2 Quarter Round Panel (LEGO part 3535)


The most prominent new mould is the 3x3x2 Quarter Round Panel in Light Bluish Gray (6435248 | 3535). Sixteen are included to form the X-wing's signature engine intakes.


As the name suggests, it sits neatly on a 3x3 quarter round footprint. Whether this represents another step toward the long-awaited 3x3 round brick is anyone's guess. For now its just nice to have more parts with this curvature.


To my knowledge, it's the first 2-brick tall studless panel - curved or otherwise. It pairs nicely with existing 1- and 2-brick tall panels as well as more exotic varieties like the 1x6x3 panel with side studs (Design ID 98280). 


The half-plate walls are great for making funky patterns too. I could see these used on an ornate castle wall or some organic sci-fi structure - perhaps even a Tardis interior? 


They blend well with many existing quarter, half and fully rounded elements too. The top left is my favourite combo. I'm not sure there's much use in nesting them inside a 4x4x6 half cone in this way but it does look cool!

8x3 Wedge Plates (LEGO parts 3544 & 3545)

The next two new moulds come in a pair:

  • 8x Wedge Plate 8x3 Left in White (6435246 | 3544)
  • 8x Wedge Plate 8x3 Right in White (6435247 | 3545)
They also appear in 75348 Mandalorian Fang Fighter vs TIE Interceptor. Since they are pretty generic elements, I doubt it'll be long before we see them elsewhere.


Each is the equivalent of two 2x4 wedges plus a 1x4 plate - so yes, they are POOPs! But useful ones, as we'll see in a minute. 


They fit right in with the existing wedge plate family, taking their place between the 3x12 and 4x6 varieties. I opted to only show one-sided types with a continuous hypotenuse (for want of a better term) but of course the 'wedge plate wave' extends far beyond what I've pictured here.


The key advantage of these double-size wedges is the fact that you can chain them to make a continuous two plate thick angled edge - ideal for a certain spaceship with four wings. Achieving the same effect with existing 1x4 versions is quite a challenge and nowhere near as compact. 

Recoloured elements 

First, the trio of recolours that excite me the most: 

  • 4x Brick Round 3 x 3 x 2 with Recessed Centre and Axle Hole in white (6390507 | 73111) - initially exclusive to this set, it can now be found in 75365 Yavin 4 Rebel Base and will soon appear in two more LEGO Star Wars sets; 75364 and 75354. 
  • 1x Game Controller [Plain] in Dark Bluish Gray (6439170 | 53118) - Exclusive
  • 8x Technic Pin Connector Round 1L [Beam] in Sand Blue (6257131 | 18654) - Exclusive

Two recolours of the largest inverted tile are included - hurray for studless undersides:

  • 1x Tile Special 4 x 8 Inverted in Light Bluish Gray (6435281 | 83496) - Exclusive
  • 8x Tile Special 4 x 8 Inverted in White (6430426 | 83496) - Appears in four other Summer 2023 Sets

Some lesser seen recolours next:

  • 2x Bracket 2 x 3 - 2 x 2, Curved Sides in Red (6369674 | 69906) - Found in 1 other set, 76405 Hogwarts Express - Collectors' Edition
  • 4x Plate Special 1 x 1 with Handle on 2 Ends in White (6431329 | 78257) - Found in 2 other sets
  • 1x Tile Round 3 x 3 in Dark Stone Grey / Dark Bluish Gray (6433729 | 67095) - Found in 2 other sets
  • 1x Tile 4X4 in Light Bluish Grey (6402193 | 1751) - Found in 5 other sets

These next two haven't been seen in sets since 2016 so it's nice to see them make a return:

  • 8x Minifig Footwear Flipper [Thick] in White (6172962 | 29161)
  • 2x Wedge Plate 3 x 3 Cut Corner in Sand Blue (4209021 | 2450)
Finally, some stragglers. Their newness might be waning but they are still nice to see:
 
  • 8x Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes in White (6263181 | 31511) Found in 4 other sets
  • 2x  Plate Special 1 x 2 [Side Handle Closed Ends] in Medium Nougat (6424277 | 48336) - A new colour for 2023, found in 4 other sets
  • 2x Plate Round 1 x 2 Half Circle with Stud (Jumper) in Brown (6428178 | 1745) Found in 4 other sets
  • 2x Plate 3 x 3 Corner in Black (6439175 | 77844) - New for 2023
  • 4x Plate 3 x 3 Corner in White (6428165 | 77844) - New for 2023

Printed elements

Excitingly, the set includes two big printed elements that historically would have been achieved with stickers. 


Firstly, this 6x13x2 Windscreen with Sand Blue Cockpit print in Trans-Clear (6433807 | 102803). It's the first time this mould has been printed, and thank goodness, because applying clear backed stickers this large can not have been fun for those that built either of the two previous UCS X-wings. 

Frustratingly, it was roaming free in the box with no protection so I'm amazed mine looks relatively scratch free. I'd never advocate for excessive packaging but a little something to keep this lovely element safe would've been appreciated. 

Until recently, info plaques would also have been done with a sticker on a plain 8x16 tile. This marks the first time a Star Wars plaque has been given the printed treatment: Tile 8x16 with Star Wars UCS X-Wing Data Sheet print in Black (6446687 | 104491).

Personally I'd sooner have a blank 8x16 tile for MOCing purposes but I'm all for removing the risk of sticker misalignment or trapped air bubbles on a collector level set. The only downside is the injection mark dead centre, but it's a small price to pay all things considered.

That's it for my look at the elements. In part 2 on Wednesday I'll take a look at the build and minifigures - assuming I can figure out how to photograph the massive ship!

Our Patreon followers on the Sand Blue, Medium Azure and Vibrant Coral tiers can enjoy part 2 right now.

LEGO® Star Wars™ 75355 X-Wing Starfighter costs US$239.99/ £209.99/ 239.99€/ AU$369.99 from LEGO.com. Please consider using our affiliate links, we may get a commission: USA LEGO Shop | Australia LEGO Shop | UK LEGO Shop.

READ MORE: LEGO® Friends review & MOC: 41747 Heartlake City Community Kitchen

Help New Elementary keep publishing articles like this. Become a Patron!

A huge thank you to all our patrons for your support, especially our 'Vibrant Coral' tier: Antonio Serra, Beyond the Brick, Huw Millington, Big B Bricks, Dave Schefcik, David and Breda Fennell, Richard Selby, Gerald Lasser, Sue Ann Barber & Trevor Clark, Baixo LMmodels, Markus Rollbühler, Elspeth De Montes, Megan Lum, Andy Price, Chuck Hagenbuch, Jf, Daniel Church, Wayne R. Tyler, Timo Luehnen, Lukas Kurth of StoneWars, and our newest patron Jamie Tallin! You folks are the wind beneath our x-wings.

LEGO® Shop at Home
USA: FREE SHIPPING every day on orders over $35!
UK: Free delivery when you spend £50 or more at LEGO!
Australia: Discover the latest promotions and offers on LEGO.com

All text and images are © New Elementary unless otherwise attributed.

9 comments:

  1. Good review!

    Just this morning (in a half-awake delirium) it occurred to me that this new panel would be great either printed or stickered as some sort of curved billboard or signage.

    ReplyDelete
    Replies
    1. Morning! That would look great... take note Ninjago City...

      Delete
    2. One of the first possibilities for them that occurred to me was their potential for use as wheel arches/mudguards! The tires https://brickset.com/parts/design-55978 and https://brickset.com/parts/design-56891 seem like they'd fit nicely while still leaving enough clearance to ensure they won't rub against the panel's inner surface.

      Delete
  2. Will a September new parts list be forthcoming? Or has Lego permanently changed access to their image database. I noticed Brickset can't display the new September parts images. (They link direct to the Lego assets server, which gives a permission denied error when the image links are entered manually.) Just curious if you have inside info.

    ReplyDelete
    Replies
    1. Yeah, the broken images are the main holdup, according to the explanation New Elementary shared on Instagram: https://www.instagram.com/p/Cw_n_GfSbao/

      The links for most of this month's new parts are broken even on the LEGO Customer Service site, so it doesn't seem like this was any sort of intentional change on TLG's part. The same was briefly the case for instruction links at the beginning of the month, but that's since been fixed, so hopefully working part images will also be uploaded to LEGO.com soon.

      Delete
  3. How does the new 3535 panel relate to 73111? From the photos they look like parts that could/should be a family.

    BTW I tried to register this comment as Max/www.tubemapcentral.com and was told that the URL was invalid, it most certainly isn't!

    ReplyDelete
  4. Nesting the panels inside the 1/2 round cone is a perfect way to make a series of semi-private booths around the perimeter of some seedy space bar.

    ReplyDelete
  5. Parts like this make me wonder how extensive the unreleased part library is. Would love to see a whole series of these. Would make building curved walls shorter or taller than the large curved panel much easier and better looking with less notches

    ReplyDelete