13 April 2026

Review: 77984 Jurassic Park Jeep® Wrangler from LEGO® Jurassic World

Posted by Tom Loftus

"Objects in this knoll are newer than they appear."

Today we take a look at the parts, printed elements and build of 77984 Jurassic Park Jeep® Wrangler, as featured in the original Jurassic Park movie from 1993.


We were given this product by The LEGO Group; the author's opinions are their own.
This article contains affiliate links to LEGO.com; we may get a small commission if you purchase.

77984 Jurassic Park Jeep® Wrangler

Price and links to pre-order: 

Other countries click here

Lego Jurassic World 77984 UCS Jeep'

 

New moulds

Two new elements are included in the set; both fall into the 'useful but not game changing' category:


4 x 8 Tile (8165)

Since the inverse of this tile already exists (83496) it was only a matter of time before we'd see a regular version. 


77984 Jurassic Park Jeep includes two colours of this new tile size, though one is printed up as the set's display plaque:
  • 1x Tile 4 x 8 in Black with Jurassic Park Jeep plaque print (6605797 | 8165)
  • 1x Tile 4 x 8 in Light Bluish Gray (6606856 | 8165)

8 x 8 Round Plate with 6 x 6 Round Opening (8083)

The next new mould also comes in two colours:

  • 1x Plate Round 8 x 8 with 6 x 6 Round Opening in White (6608409 | 8083)
  • 1x Plate Round 8 x 8 with 6 x 6 Round Opening in Black (6594933 | 8083)
Both are used in side builds somewhat superfluously, so they could be absorbed into your collection without compromising the rebuild or display value of the set too greatly. 


A prime use for the new plate will be to secure 4x4 quarter curved elements without impeding interior access or leaving any jagged edges (above, left) - handy for tall round structures such as rockets or castle towers. Comparing it to it's solid-plate counterparts (above, top left) is a little amusing, it's as if someone has taken a disk cutter to the solid 8 x 8 version (74611). 

A close relative is missing from the family photo (above, bottom right): the recently introduced Plate Round Half 5 x 8 with 4 x 6 Round Cut-out (7961) found in the LEGO® Star Wars™ SMART Play™ sets.


Canvas (6616718)

The mahoosive canvas that adorns the Jeep comes partially pre-folded in its own paper pouch. Yay, another bit of LEGO® DUPLO®-compatible packaging! It's a rather lovely 'element' with its dark tan and black dual-sided colouring. It surely has potential for re-use as a spacious minifigure tent or a garment for a large figure build. 


Recolours

Light Bluish Gray

It's always nice when the selection of recolours marries up with the colour scheme of the set.

  • 2x Brick Curved 1 x 4 x 1 in Light Bluish Gray (6614510 | 5849)
  • 4x Slope 30° 1 x 1 x 2/3 Double Corner in Light Bluish Gray (6614511 | 7826)
  • 2x Brick Round Curved 1 x 1 x 1 Quarter Dome in Light Bluish Gray (6605331 | 5848)

Dark Tan

  • 2x Brick 2 x 6 in Dark Tan (6614509 | 2456, 44237) - previously only available as a Q-part
  • 8x Technic Axle and Pin Connector Toggle Joint Smooth in Dark Tan (6614517 | 32126, 3182)
  • 6x Brick Curved 1 x 2 x 1 2/3 with 1 Cutout in Dark Tan (6614507 | 5907)
  • 4x Brick Round Corner, Curved 2 x 2 x 1 2/3 Quarter Dome with 1 Cutout in Dark Tan (6614508 | 5906)
  • 16x Technic Pin Connector Round [Slotted] in Dark Tan (6614516 | 62462, 29219)

Red

  • 5x Wheel 43.2 x 18 with Flush Axle Stem in Red (6613799 | 86652)
  • 2x Hinge Plate 1 x 2 Locking with 1 Finger on Side, without Groove in Red (6614512 | 44567b, 49716)
  • 5x Technic Tread Sprocket Wheel Small 6 Tooth in Red (6613801 | 57520, 75903)
  • 2x Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth in Red (6614513 | 57360)

Other colours

  • 5x Wedge Plate 2 x 2 Cut Corner in Dark Green (6614111 | 26601)
  • 4x Bag / Handbag / Purse Angular with Zipper [Plain] in White (6614515 | 93091)
  • 1x Hood in Yellow (6610171 | 74528, 5368)

Rare parts

Parts in colours that appear in 1 other set:

  • 3 x Slope 30° 1 x 4 x 2/3 in Dark Bluish Gray (6594313 | 7835)
  • 1 x Plate Special 1 x 2 with Handles on Ends in Dark Brown (6596482 | 18649)
  • 2 x Tile Round 2 x 2 Half Circle in Light Bluish Gray (6565027 | 5520)
  • 3 x Wedge Tile 2 x 2 Left in Red (6602157 | 7828)
  • 3 x Wedge Tile 2 x 2 Right in Red (6602155 | 7829)
  • 4 x Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced in Red (6588365 | 42136)
  • 1 x Equipment Stein/Cup with Dark Brown Drink Pattern in Trans-Clear (6570653 | 68495)
  • 8 x Tile Special 2 x 2 with 2 Quarter Round Cutouts in Dark Tan (6499868 | 3396)
  • 2 x Tile Special 2 x 2 with 2 Quarter Round Cutouts in Dark Green (6584866 | 3396)
  • 1 x Tile Round 2 x 2 Half Circle in Dark Green (6584783 | 5520)
  • 1 x String Cord Medium Thickness (1mm) 66cm in Dark Bluish Gray (6547106 | 113612)
  • 4 x Tile 4 x 4 Curved, Macaroni in Trans-Clear (6544432 | 1939)

Parts in colours that appear in 2 or 3 other sets:

  • 2 x Slope 30° 1 x 4 x 2/3 in Black (6601521 | 7835)
  • 2 x Technic Beam 2 x 3 Thick [90° Offset Centre Beam Hole] in Black (6563620 | 3167)
  • 3 x Plate Special 2 x 3 with Rocks in Dark Green (6489082 | 27261)
  • 2 x Tile Round 1 x 1 Half Circle in Dark Green (6554615 | 35399)
  • 6 x Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth in Dark Tan (6441240 | 57360)
  • 2 x Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end in Dark Tan (6490610 | 25214)
  • 1 x 5520 Tile Round 2 x 2 Half Circle in Dark Bluish Gray (6580726 | 5520)
  • 1 x Hose Rigid 3mm D. 29L / 23.2cm in Flat Silver (6335213 | 76931)

Colour variation

While on the topic of colours: I was disappointed to find variation between elements moulded in red. The differences are distinct enough to notice in person, but are hard to capture on camera: 


Colour differences between red LEGO® Technic parts – particularly ones with pins – seem to be fairly common due to the difference in material, but the darker opacity of the 1x1 plates took me by surprise.

Decorations

Prints 

For a collectors-level set, the number of exclusive prints is also surprising: just three, and we've discussed one of them already!

  • 1x Tile 8 x 4 with print in Black (6605797)
  • 2x Slope 30° 1 x 2 x 2/3 with print in Dark Bluish Gray (6611679)
  • 1x Brick Round 1 x 1 Open Stud with 'Barbasol' print in Dark Blue (6601950)

Stickers

All of the important surface details are instead achieved with stickers:


Thankfully the colour match from print to plastic is excellent; I hope this is the case for all batches and regions. Another pleasant surprise is the inclusion of four full sets of tiles so you can easily swap between the numbered Jeep variants. 

Minifigure


The ill-fated Dennis Nedry has a new torso design (6610175) and an exclusive double-sided head (6600501) which lets you choose whether he's rain-soaked or splattered with dinosaur goo. 

It would be great to get Dennis sans-kagool one day, but given this version of the character is associated with the titular vehicle, the choice to go with raincoat Dennis 3.0 does makes sense. It's also the first time we've seen him with a hood, so there is that.

The build 


The Jeep begins with a hefty Technic-brick chassis before switching to studs-up plate and brick stacking for the bulk of the build process. In the later stages, the car's personality starts to shine though, with the fenders, front grill and seats added in satisfying subassemblies. 


Assembling the steering mechanism made me question my sanity. Built as per the instructions, the gear rack twists as it moves side to side. Convinced I'd done something wrong, I sought help from our resident Technic experts and even rebuilt the entire assembly to check I'd not made a mistake. 

Ultimately, it seems the twist is intentional because the mechanism works just fine and is pretty fun to operate with a good range of motion. Just a rare example of a building stage that feels incredibly unintuitive in the moment. Also shown in the video are the other functions: opening doors and bonnet, and the front-mounted tow cable. 

Complete


Towards the end of the second and final instruction booklet, you're presented with the choice to build one of the four Jeep variants seen throughout the first movie. The numbered bags and page jumping makes the decision seem definitive, but in reality it's easy to swap between the styles (especially with the extra tiles we saw earlier). Jeep 18 & 29 are also identical beyond the numbers on the stickers, so technically there's really only 3 distinct looks to choose from:
  • Jeep 10 – No roll cage, no canvas, no light bar and no aerial, but with side crates
  • Jeep 12 – Roll cage with canvas top
  • Jeep 18 & 29 – Roll cage but no canvas top


Here's a closer look at the crates and accessories intended for Jeep 10. The brick-built Maxabeam on the right makes good use of a pair of handcuffs to represent the coiled wire at the rear of the unit.  



In terms of shaping, the biggest offenders are the... fenders. They don't look as bad as that pun was, but two modules wide feels a little excessive, and there are a few gaps where they change angle and intersect with the front grill. 

Overall though, I'm satisfied with the appearance of the finished model. It's sturdy-looking and a little boxy, just like the real thing. It even looks good around the back.


 
No expense was spared on the interior details, with nicely tiled footwells and comfy-looking chairs. Lifting the hood reveals the engine, which can also be removed entirely for a closer look. Not being able to turn the steering wheel is a minor miss – I plan to swap the red 2L Technic axle for a 2L bar on my copy. The "Objects in mirror are closer than they appear" sticker, complete with looming T-rex, is an obvious thing to include, but is still a fab little detail. 



Despite the reliance on stickers, the model still looks pretty complete without them; just a bit more generic. The door-mounted Jurassic Park logos really do the heavy lifting in making the model feel 'Hollywood'. 

Oh, and since I've failed to mention it elsewhere, the floodlight casings on the top are handbags – ingenious!

Side builds 

Cementing the Jeep as a display item are a couple of smaller builds.


The sign to East Dock can spin which is a fun nod, but – as simple as they are – I like the hidden Dino-DNA Easter eggs at the base even more. 

A perch for unused Dennis headgear can be found at the rear of the display stand; a neat way to prevent the small parts getting lost.



Speaking of storage, it would be great if there were a dedicated spot for the alternate stickered tiles. I found they can fit comfortably under the bonnet (along with the Maxabeam), but it's far from an elegant solution.

Verdict

It's a solid set (literally and figuratively) with a sturdy construction, decent accuracy and multiple options for customisation. I have to assume a scale-compatible Ford Explorer is on the way as it's the natural companion to this vehicle and would complement the Jeep's relatively plain colour scheme nicely.

At US$199.99/ £179.99/ 199.99€/ AU$299.99, the reliance on stickers may feel inappropriate to many, but considering how many printed pieces would have been required to complete all four versions, I can see why this route was chosen.

The build techniques and parts selection are appropriate for the model, but don't feel exceptional unless you need to bump up your stock of light bluish grey or if you enjoy a more the traditional LEGO building experience. In other words, it's a set for Jurassic Park fans (with deep pockets!), not us parts monkeys, and that's okay.


Pre-order now in advance of 7 May release

Lego Jurassic World 77984 UCS Jeep'

 


READ MORE: Available until 19 April, LEGO® GwP 40907 Restaurants of the World – Mexico

 

Help New Elementary keep publishing articles like this. Become a Patron!

A huge thank you to all our patrons for your support, especially our 'Vibrant Coral' tier: London AFOLs, Antonio Serra, Beyond the Brick, Huw Millington, Dave Schefcik, David and Breda Fennell, Gerald Lasser, Baixo LMmodels, Sue Ann Barber and Trevor Clark, Markus Rollbühler, Elspeth De Montes, Megan Lum, Andy Price, Chuck Hagenbuch, Jf, Wayne R. Tyler, Daniel Church, Lukas Kurth (StoneWars), Timo Luehnen, Chris Wight, Jonathan Breidert, Brick Owl, BrickCats, Erin and Dale, Jake Forbes, H.Y. Leung and our newest top-tier patron, Keith Marcelletti! You folks are better than inverted cheese slopes.

All text and images are ©2026 New Elementary unless otherwise attributed.

Posted by: Posted on
Labels: ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)