19 November 2026

New moulds: 2027 LEGO® Speed Champions F1® Race Car collection revealed

Posted by Tim Johnson


Once again, LEGO® Speed Champions will be releasing a swathe of Formula 1® cars, and the 2027 lineup is available to pre-order now (excluding North America) in advance of a 1 March release date. This collection showcases the 2026 grid, across 11 products each with two drivers, meaning there are 22 F1® minifigures in the range. 

We, of course, see heaps of new moulds, so let's take a closer look at the official images!


This article contains affiliate links to LEGO.com; we may get a small commission if you purchase.


LEGO® Speed Champions Formula 1® Collection, sets 77267 to 77277
  • Release date: 1 March 2027; available for pre-order now (excluding North America)
  • Ages: 10+, except sets with Red Bull branding which are 18+ as marked below
  • Pieces: 196 to 231, as listed below
  • Dimensions: over 1.5 in. (4 cm) high, 2.5 in. (6 cm) wide and 7.5 in. (19 cm) long 
  • Price: 29.99€/ £24.99/ US$29.99/ AU$44.99/ Other countries see below 

  • Pieces: 230 


  • Ages: 18+ 
  • Pieces: 203 


  • Pieces: 196 
  • Pieces: 216 
  • Pieces: 199 

  • Pieces: 231 

  • Ages: 18+ 
  • Pieces: 206 
 

  • Pieces: 212 

  • Pieces: 209 
 
  • Pieces: 215 


  • Pieces: 212 

New moulds

Brick Sloped 18° 2 x 2 x 2/3


The 'grateless cheese', Brick Sloped 18° 2 x 1 x 2/3 (5404) gets a sibling that is twice as wide, offering a larger area for decoration. Even when not decorated, it will also look so much better than two 5404s, what with their bevelled corners. Having a 2x2 cheese will open up a lot of possibilities, given the additional connection points. 

Bar, Curved U-Shape Ø3M



The halo is a new U-shaped piece with dedicated 3.18mm bar attachment areas; an upgrade compared to the flex tube! Note also the curve is a perfect semicircle, which will be much more useful than the other recent U-shaped bar, part 7052. The curve's radius is 1.5 modules, making a diameter of 3 modules.

It comes in 5 colours across the 11 sets: light bluish grey, white (in 2 sets), dark pink, black (in 6 sets), and green.


Bar 1L with Clip

You may have already spotted this in recent product reveals: a streamlined version of the beloved mechanical hand!


It comes in green in 77271 Aston Martin Aramco AMR26, dark pink in 77274 BWT Alpine A526, white in 77275 TGR Haas VF-26, and black in the 8 other sets.

Fond as we all are of the existing Bar 1L with Clip (3484), its angled surfaces limit rotation – often useful, but more often builders would prefer as much joint rotation as possible. I for one welcome our new non-robot overlords. 

Wedge Tile 3 x 3 Double


Fans have been thrilled to receive more wedge tiles in recent years, and while this one is not as useful (given it is not a left/right pair) it still looks stunning. I'd love to see a Blacktron logo on it, and given it is stickered rather than printed, we could do that! 

We get 9 colours of it across the 11 sets, which is great news for a new mould. Going clockwise in the above image, it comes in red, dark blue, orange, teal, green, blue (in 2 sets), white (in two sets), light bluish grey, and black.



Suspension mount


This support piece is presumably the same as the 2025 version (6813), but without the fender.



Brick Wedged, Curved 1 x 3

You'd be forgiven for missing this one, but it didn't escape Tom's eagle eye.


Joining the existing 1x4 (5415) are left and right 1x3 curved wedges. The profile of the shorter side matches a 2x1 'baby bow' (11477) and similar pieces, while the longer side is a match for the 3x1x⅔ slope (7302) introduced in 2025.

We've spotted them in both blue and black in 77272 Atlassian Williams FW48, and black in 77270 Mercedes-AMG PETRONAS W17, 77275 TGR Haas VF-26, 77276 Audi Revolut R26 and 77277 Cadillac MAC-26.

Brick Curved 2 x 4 Inverted


This 2x4x1 studless piece is the little brother of the 2025 piece, Brick Curved 2 x 6 Inverted (6806), and its concave curve also matches 2021's Brick Curved, 3 x 1 with 1/3 Inverted Cutout (70681). The matching convex curve is an inverted baby bow (24201) and its siblings.

This red example above is from 77275 TGR Haas VF-26; the only set of the 11 that does not feature this new mould in black.



Bracket 1 x 1 - 1 x 2 Centered

This new black SNOT bracket is quite obvious on set 77267 Scuderia Ferrari HP SF-26, being the "T" of the T-cam (which houses cameras and telemetrics).

We are excited to see this narrower version of Bracket 1 x 2 - 2 x 2 Centered (7674), because we've been hoping for it ever since Chris Stamp introduced us to part 7674.
I would like to expand this family; I would love a 1-module wide version, and I would love some other versions of it, because I just see all the benefits.

– Christopher Leslie Stamp, former Design Manager for LEGO® City 

So what's all the fuss about? Have a look at Tom's excellent analysis of how to use the 2x2 version, part 7674 from back when it was introduced just under a year ago, where he hoped for a possible 1-wide version. 


He even mocked it up, above right. He wasn't spot on, having given it firmer hold with two studs, but he's glad about that – what they've made is much more useful!

Black is the only colour provided, as far as we have spotted, but 77267 Scuderia Ferrari HP SF-26 isn't the only set containing the new piece; it's also in 77271 Aston Martin Aramco AMR26 and 77275 TGR Haas VF-26. We've also seen it in product images from other themes that are releasing sooner than these March F1 sets.


Brick Sloped 45° 2 x 1 x ⅔ Double with 1 Stud 

We're staying with T-cams, because four of the other sets use another a new piece below it.


The intriguing new mould (below the 1x1 bracket) has a 1x2 footprint, with two 45° slopes rising to a flat 1x1 module surface in the centre, which has a stud. Shall we call it a roof jumper? 

It comes in a different hue in each of the four sets it appears in: yellow in 77268 Oracle Red Bull Racing RB22, azure in 77269 McLaren Mastercard MCL40, blue in 77274 BWT Alpine A526, and light bluish grey in 77276 Audi Revolut R26.

It reminds me of part 3044 (introduced in 1959!) with its top chopped off, however the angles are slightly different. Perhaps a better way to imagine it is if you placed two Brick Sloped Double 45° 1 x 1 x ⅔ (35464, shown in yellow below) next to each other and filled in the jagged gap between them and put a stud on it.

The blue piece shown above is Wing 1½ x 1 x 1 (8193) which premiered in June 2026 LEGO Speed Champions sets. It shares the same angle as the new piece, as well as having an offset stud, but is 1 plate taller overall. These pictures are from Tom's thorough exploration of how to use part 8193. 

Wheel

 

Hey guys there's a new wheel, in various colours and printing across the range. Good night




Release date
: 1 March 2027; available for pre-order now (excluding North America)

Prices in all countries

  • Australia: 44.99 AUD
  • Austria: 29.99 EUR
  • Belgium: 29.99 EUR
  • Brazil: 249.99 BRL
  • Canada: 42.99 CAD
  • China: 229 CNY
  • Croatia: 30.99 EUR
  • Czech Republic: 709 CZK
  • Denmark: 269.95 DKK
  • Estonia: 30.99 EUR
  • Finland: 34.95 EUR
  • France: 29.99 EUR
  • Germany: 29.99 EUR
  • Greece: 30.99 EUR
  • Hong Kong: 219 HKD
  • Hungary: 11290 HUF
  • India: 3499 INR
  • Ireland: 29.99 EUR
  • Israel: 35 EUR
  • Italy: 29.99 EUR
  • Japan: 4980 JPY
  • Latvia: 30.99 EUR
  • Lithuania: 30.99 EUR
  • Luxembourg: 29.99 EUR
  • Malaysia: 129.9 MYR
  • Mexico: 649 MXN
  • New Zealand: 54.99 NZD
  • Norway: 399.9 NOK
  • Poland: 126.99 PLN
  • Portugal: 29.99 EUR
  • Romania: 159.99 RON
  • Singapore: 45.9 SGD
  • Slovakia: 28.99 EUR
  • Slovenia: 30.99 EUR
  • South Africa: 529 ZAR
  • South Korea: 43900 KRW
  • Spain: 29.99 EUR
  • Sweden: 379.9 SEK
  • Switzerland: 31.9 CHF
  • Taiwan: 979 TWD
  • The Netherlands: 29.99 EUR
  • Turkey: 1799 TRY
  • Ukraine: 1499 UAH
  • United Kingdom: 24.99 GBP
  • USA: 29.99 USD

 


Release date
: 1 March 2027; available for pre-order now (excluding North America)


 

READ MORE: Round up of every quarter-circle element

 

Help New Elementary keep publishing articles like this. Become a Patron!

A huge thank you to all our patrons for your support, especially our 'Vibrant Coral' tier: London AFOLs, Antonio Serra, Beyond the Brick, Huw Millington, Dave Schefcik, David and Breda Fennell, Gerald Lasser, Baixo LMmodels, Sue Ann Barber and Trevor Clark, Markus Rollbühler, Elspeth De Montes, Megan Lum, Andy Price, Chuck Hagenbuch, Jf, Wayne R. Tyler, Daniel Church, Lukas Kurth (StoneWars), Timo Luehnen, Chris Wight, Jonathan Breidert, Brick Owl, BrickCats, Erin and Dale, H.Y. Leung, Keith Marcelletti and our newest top-tier patron, Stripes The Tiger! You folks are better than chromed slopes.

All text and images are ©2026 New Elementary unless otherwise attributed.

8 comments:

  1. Can it be that the wheel is the same one and that the rim is actually an insert? If you look at pictures from the backside of the wheel, it looks identical to the current one. A new "wheel cover" piece makes more sense.

    ReplyDelete
    Replies
    1. I agree, sure looks like an insert to me.

      Delete
  2. The new front suspension mount is quite a bit different from the old (6813). It is quite a bit shorter at only about 2 plates-ish tall. It's essentially a technic axle connector which has additional strut shapes molded on that extend rearward.

    I'm also curious about the part which the front axle mounts through. The nose of the car is only 1 brick wide, and it appears that there is a 1x2 brick with technic axle hole in it, but that brick seems to have a 1-plate thick, 1-stud extension, extending toward the front of the car (and perhaps another extending rearward?). I presume this gives better sturdiness and attachment options for these cars, I think this is a new part? It's very obvious in the linework graphic of the cars on the Lego site.

    ReplyDelete
  3. It's not visible in any of the pics but I bet the 2x2 double long cheese slopes are attached to the new 1x2 upward and downward "double brackets" that we got our first glimpse of in the upcoming Link and Epona set (used on Link's arms and Epona's legs). Those parts seem ideal for locking a long 1-wide section like this together, much more securely than the alternatives. I guess we'll see for sure when reviews show up.

    ReplyDelete
  4. I'd like to make a motion to call the "grater-less cheese grater" a "doorstop", and the new piece therefore is a 2-wide doorstop.

    ReplyDelete
    Replies
    1. I propose "double stop" for this new double-wide version.

      Delete
  5. The new "Brick Wedged, Curved 1 x 3" is an exciting addition to the curved wedge family! And it's about time we got a single-wide 3-long such piece. Gone shall be the days of having to structure your whole build around part 11291 3×4×⅔ Wedge w/ Cutout, when that's even possible to do. In fact, I wonder if that piece will be retired before long enough now? Seems like it should be possible to do everything with these new slopes that the old piece could do, although I suppose it may still find use for structural purposes in miniature vehicle builds.

    ReplyDelete