17 November 2026

Review & alt builds: 31385 Beautiful Dolphins from LEGO® Creator

Posted by Daniele

We are happy to present our first article from Daniele A. Combatti (@admiraltyphoon on Instagram and Flickr). Tim first met him at London AFOLs eight years ago and we are excited to now have him on the team!


LEGO® Creator 3-in-1 has done a massive shift over the last few years, focusing most of its range on more display-focused and animal-themed sets; one could see it as an alternative to the LEGO® Botanicals and the occasional animal that pops up in LEGO® Icons and LEGO® Ideas sets.

Today I’ll be having a look at 31385 Sea Animals: Beautiful Dolphins, a set from the January 2026 wave, as well as its alternate models. I’ll also be having a play by building my own alternate models, using three copies of the set!


We were given this product by The LEGO Group; the author's opinions are their own.
This article contains affiliate links to LEGO.com; we may get a small commission if you purchase.

31385 Sea Animals: Beautiful Dolphins

  • Release date: 1 January 2026
  • Pieces: 542
  • Ages: 9+

Price: 

Other countries click here

Lego Creator 3-in-1 31385 Sea Animals: Beautiful Dolphins

 

Pieces from the set are available on Pick a Brick (PaB). Individual elements are linked to PaB throughout the article, or see all that are available via this link below.

31385 Beautiful Dolphins on PaB



Page contents



Elements

Bright Light Blue

Bright light blue has started to become more common in the past few years since it’s been the focus of sets such as 10298 Vespa 125 and 76470 Enchanted Flying Ford Anglia as well as others, so it is nice to expand the availability of parts in this colour and other shades of blue as we keep going down the list of recolours.

  • 1x Wedge Curved 10 x 3 Right in Light Royal Blue/ Bright Light Blue (6590661 | 50956, 118557, 78884), still exclusive to this set
  • 1x Wedge Curved 10 x 3 Left in Bright Light Blue (6590663 | 50955, 118556, 78883), still exclusive to this set
  • 1x Slope Curved 1 x 6 in Bright Light Blue (6534930 | 6801), still exclusive to this set
  • 2x Brick Round Curved 1 x 1 x 1 Quarter Dome in Bright Light Blue (6590669 | 5848), now also found in 2 other sets

  • 1x Brick Curved 1 x 2 x 1 2/3 with 1 Cutout in Bright Light Blue (6590665 | 5907), now also found in 43025 Nike Air Max 95 x LEGO Set
  • 2x Slope Curved 2 x 2 with Stud Notch Right in Bright Light Blue (6529335 | 5093), also in 2 other sets
  • 2x Slope Curved 2 x 2 with Stud Notch Left in Bright Light Blue (6529339 | 5095), also in 2 other sets
  • 4x Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate in Bright Light Blue (6383082 | 18863, 113474, 61409, 67119), previously available in 10298 Vespa 125
  • 4x Plate Special 1 x 1 with Tooth in Bright Light Blue (6590679 | 49673, 35162, 49668), later also found in 31220 Claude Monet – Bridge over a Pond of Water Lilies


  • 1x Brick Curved 6 x 1 in Bright Light Blue (6383083 | 41762, 35164, 42022), previously in 3 other sets
  • 1x Wedge Curved 6 x 2 Right, Smooth Inner Walls in Bright Light Blue (6501139 | 5711); see note below
  • 1x Wedge Curved 6 x 2 Left, Inner Ridges in Bright Light Blue (6372336 | 41748, 52216, 69067, 5830); see note below
  • 6x Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle in Bright Light Blue (6590664 | 5852), in 2 other sets

It is listed that the bright light blue 6 x 2 right-hand curved wedge with Design ID 5711 only shows up in this set, because this is an updated version of the mould with Design ID 41747, which previously appeared in 3 sets in bright light blue. The difference with the new version is that the small inner ridges lining the walls have been removed, but for us builders, there is no real functional difference. 

Strangely, its left counterpart in this set still uses the old “inner ridges” version. We've experienced the same anomaly but with the left version in other sets of late. perhaps they're just using up stock.


  • 2x Brick Curved 2 x 4 x 1 in Bright Light Blue (6535836 | 5842) in 5 other sets
  • 1x Brick Curved 1 x 2 x 1 No Studs in Bright Light Blue (6523868 | 37352, 98030) in 7 other sets
  • 5x Bracket 1 x 1 - 1 x 2 Inverted in Bright Light Blue (6469991 | 73825) in 4 other sets


Other rare and notable elements

Surprisingly, we get a couple of rare cool yellow and flame yellowish orange parts, both used for marine flora.

  • 2x Plate Angled 3 x 3 with Heart Shape in Flame Yellowish Orange/ Bright Light Orange (6529336 | 39613) in 2 previous sets
  • 2x Hair Small Tuft in Cool Yellow/ Bright Light Yellow (6516341 | 68212) in 2 other sets


  • 2x Plate Special 2 x 2 with Horizontal T-Bar Underneath in White (6590682 | 5066) in 3 other sets
  • 2x Brick Wedged, Curved 1 x 4 with Stud Notch Left in White (6477766 | 5415)
  • 2x Brick Wedged, Curved 1 x 4 with Stud Notch Right in White (6477766 | 5414)

While the 1x4 curved wedge slopes are more common nowadays, it’s still nice to get more than 1 pair.


Light aqua parts are also present here, mostly for the sea foam in the display base:

  • 7x Plate Round Corner 5 x 5 with 4 x 4 Round Cutout in Aqua/ Light Aqua (6370300 | 80015) in 4 other sets
  • 2x Brick Arch 1 x 3 x 1 2/3 Curved Top in Aqua/ Light Aqua (6527916 | 5843) in 1 previous set
  • 2x Slope Curved 3 x 1 No Studs in Aqua/ Light Aqua (6540137 | 50950, 63278, 110132, 1605) in 4 other sets


Teal also pops up here, also mostly making up the parts for the sea waves:

  • 1x Brick Curved 10 x 1 [Symmetric Inside Ridges] in Bright Bluish Green/ Dark Turquoise (6591845 | 13731) in 1 other set
  • 4x Technic Brick 1 x 1 with Axle Hole in Dark Turquoise (6590680 | 73230), now in 2 other sets
  • 6x Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] in Dark Turquoise (6586089 | 44860, 93793, 5731, 60897) in 1 other set


Being a water-themed set, we couldn’t not get some trans-light blue elements as well:

  • 4x Plate Special 2 x 2 with Double Inverted Curve, 1 Stud in Transparent Light Blue/ Trans-Light Blue (6527412 | 4190) in 5 other sets
  • 4x Brick Curved 1 x 2 x 1 with Curved Top in Trans-Light Blue (6526019 | 7191, 5841) in 6 other sets
  • 9x Slope Curved 2 x 1 No Studs [1/2 Bow] in Trans-Light Blue (6435020 | 3593, 11477, 113486, 17134, 67128); in 41 other sets but 9 is a decent quantity for a set this size



The completed builds

A-Model – Beautiful Dolphins


The primary model of the set is a mother dolphin and its calf jumping over a sea wave, with an underwater section featuring corals of varying colours and sizes, as well as a tiny crab.



The dolphins themselves are well designed, with clean separation between their bright light blue bodies and white undersides – the calf is simpler and uses a basic 1-stud wide body and SNOT to build detail on the sides.



The mother dolphin uses a few more interesting techniques, mainly angled sections using Mixel balljoints that match perfectly with the ‘cheese grater’ slopes (61409).



The display stand/base itself is also worth talking about, with the way the wave curves around and locks with the seabed and the pillar coral using both SNOT and Technic bricks.

However, being built with SNOT means one side is where you can see all the antistuds, meaning you can only display this set on one side (maybe two, if you like jumping dolphins facing forwards).


The B-model – Beautiful Seahorse

The second alternate model in this set is a seahorse floating above a small section of seabed, with a couple of seaweeds waving about.



With its smaller size, the building experience is more streamlined, building a 1-module-wide core and adding shaping on its sides, but the designer chose to add in light aqua and trans-light blue to its colour scheme respectively for its keel (belly) and its dorsal and pectoral fins, making it stand out more.

I do like that it’s built on top of the pillar corals, so unlike the dolphins you can rotate it depending on which orientation you want it displayed.



The seabed base is nice and compact, covered up mostly by the coral. You also get to build a cute oyster clam with a (square) pearl.

In the previous picture you will notice it suffers the same issue as the A-model’s base: as it’s all built sideways, one side has exposed plate antistuds, which is odd given that there are dark tan inverted curved slopes and tan plates in the spares that can be used to improve it.



Some poor critter must be afraid of such a massive seahorse!


The C-model – Beautiful Crab


Our current of builds leads us to the third and final model: a crab. That means this set could be subject to carcinisation: a form of convergent evolution in which non-crab crustaceans evolve a crab-like body. (Source: Wikipedia).



The core of the build is simpler but bulkier compared to the other two models, with a clever reuse of the light aqua and dark turquoise curved plates & bricks to form the legs, although with no articulation; the few Mixel balljoint elements are used to hold its claws, which are hinged using rounded plates.

The eyes are built separately and attach to the body using the ‘espresso plate’ (32828), so you can adjust them and make the crab more expressive.



We also get a part of seabed included in this build, but the real highlight is the jellyfish that shines with its shaping and good usage of trans-light blue elements, including all four of the ‘pagoda plates’ (4190) for its top part, also known as the bell.


Verdict

31385 Beautiful Dolphins is a unique set that stands out among the ever-growing stream of LEGO Creator 3-in-1 animal sets and display sets, mainly because it combines the two aspects in a colourful and striking model that features a good amount of detail – the main drawback would be that you’re only able to display it in certain angles.

While normally B and C alternate models progressively go lower with the parts count, I was surprised to see that in this case they both used roughly a similar amount of bricks between themselves, while also keeping a good level of detail and parts reuse.

In terms of value, at £44.99/ US$49.99/ €49.99/ AU$79.99 for 542 pieces it is just about passing the threshold for good value, but the number of new and rare element recolours are in its favour.


The Beautiful, The Fierce and The Odd: my alt builds of set 31385

I wanted to challenge myself to build more sea animals, although interestingly this January 2026 wave of LEGO Creator also features another sea-themed set with 31381 Fierce Shark with a Treasure Chest; with beautiful and fierce sea animals covered, I think it’s time we check out some weirder ones! 


Blue Sea Dragon


First up, we have the Glaucus Atlanticus, also known as Blue Sea Dragon, a type of poisonous sea slug that is found across temperate and tropical waters. They feature sets of cerata or papillae on their sides, which are finger-like outgrowths that are used for swimming and stinging prey. They tend to have stripes of varying shades of blue throughout their body, going from a lighter central stripe to darker extremities, which I tried to recreate with the parts available.

But this colourful side is actually its underside!



What looks like a silver/white underside is their dorsal side, which is upside down simply because of where their gas sacs are in their body, used for floating on the water surface.

I was happy that there were enough white parts to maintain a clean colour separation!


Portuguese Man O’ War


The Portuguese Man O’ War is a very unique creature, and while it may look like a jellyfish, it’s actually a colonial organism, essentially made up of many individual organisms called zooids, which altogether work to maintain and function as one single organism. 

Below its bladder it features a cluster of polyps in charge of digestion and other bodily functions, from which many long, stinging tentacle strands hang from. 

The cluster tends to be purplish-red on the actual creature, so this is where I used the flame-yellowish orange round plates, and the light aqua and dark turquoise curved plates and bricks for its tentacles, similarly to how they were used as seaweed in the seahorse B-model for 31385 Beautiful Dolphins. 

Fun Fact: the Blue Sea Dragon actually preys on the Portuguese Man O’ War, eating parts of their tentacles and transferring the venom into its own cerata!



The most iconic part of the Man O’ War is its gas-filled bladder, which allows it to float just above the water surface. The top part, resembling the sails of a ship (hence the origin of the name), gets used to navigate the waters by wind! 

The set didn’t have enough trans-light blue elements to create a fully transparent bladder, so I chose to keep them all towards the top sail part.


Cuttlefish


Cuttlefish are molluscs, related to squids and octopuses, and one of the most intelligent sea invertebrates; They can change their skin colour and pattern for camouflage or hypnotising prey before catching them.

They have 8 arms (not tentacles!), which are used for holding prey, and sometimes are used also as part of their prey hypnosis.

It was a challenge to use all of the dark turquoise 4 x 4 macaroni bricks (48092) for the arms while still looking natural, so in the end I added the light aqua 5 x 5 rounded plate (80015) and 1 x 3 x 1⅔ half arch brick (5843).

I’m also really happy most of the trans-light blue elements got used to make the fins that surround its mantle (body), which are used for water manoeuvrability.



In addition to their arms, they also have two retractable grabbing tentacles for catching their prey.

Similar to the Blue Sea Dragon, cuttlefish also have a white-ish underside which contains the cuttlebone, an internal shell that they use for controlling their own buoyancy.

Here I’ve also managed to use most of the white parts in the set to round up the underside, as well as using the bright light blue tooth plate (49668) to imitate the retracted tentacles. 


Buy on LEGO.com

Lego Creator 3-in-1 31385 Sea Animals: Beautiful Dolphins

 

31385 Beautiful Dolphins on PaB

 

 

READ MORE: LEGO® Ideas 21375 Godzilla roars into stores on Black Friday

 

Help New Elementary keep publishing articles like this. Become a Patron!

A huge thank you to all our patrons for your support, especially our 'Vibrant Coral' tier: London AFOLs, Antonio Serra, Beyond the Brick, Huw Millington, Dave Schefcik, David and Breda Fennell, Gerald Lasser, Baixo LMmodels, Sue Ann Barber and Trevor Clark, Markus Rollbühler, Elspeth De Montes, Megan Lum, Andy Price, Chuck Hagenbuch, Jf, Wayne R. Tyler, Daniel Church, Lukas Kurth (StoneWars), Timo Luehnen, Chris Wight, Jonathan Breidert, Brick Owl, BrickCats, Erin and Dale, H.Y. Leung, Keith Marcelletti and our newest top-tier patron, Stripes The Tiger! You folks are better than chromed slopes.

All text and images are ©2026 New Elementary unless otherwise attributed.

1 comment: