15 December 2018

LEGO® Minecraft animals: Horse and Wolf

Posted by Admin
Jonas Kramm has been examining the LEGO® Minecraft animals and thinking up inspiring ideas as to how they might be used for something other than blocky animals! 

Welcome to the last lesson of Minecraft Anatomy class. Today we will analyse the horse and the wolf to see what can be done with grey Minecraft moulds.

Horse

The horse mould comes in two colours: Dark Stone Grey [TLG]/Dark Bluish Gray [BL] (Animal Head, No. 21|Element ID 6195338|Design ID 34454) released in 2017 and Medium Stone Grey [TLG]/Light Bluish Gray [BL] (Animal Head, No. 29|6218829|37579) from 2018's 21144 The Farm Cottage. I don’t have the darker version for comparison but I assume they have the same mould and merely different printings.


The head’s base is like a 1x2 jumper plate but note the bottom is without tubes, which allows the part to slide on one stud in the same way a 1x2 tile can.


The head section is exactly one brick wide. The front of the snout, the mane and ears are a bit out of System as you can see in the pictures. The thickness of the mane is a bit less than a tile, so you can’t clip it.


When you interlace several copies of the horse heads you immediately get some interesting textures. And if you hide the black eyes, the white printings aren’t that distracting anymore.



Wolf

The wolf head (Animal Head No.15, No. 2|6192716|34042) is the same as the dog from way back in 2015 (Animal Head No.15, "No.1"|6131703|21098) but with different printing and so far is only available in Medium Stone Grey [TLG]/Light Bluish Gray [BL] in 21137 The Mountain Cave.


It connects to the LEGO System by a combination of a 1x2 plate and 1x2 tile on top, but the distance to the bottom of the part is a bit odd – two and a half plates.


Aside from the intended connection points there is an illegal way to connect the heads to each other, as the snout fits perfectly between the ears.


By arranging the wolf heads in the right way, the undersides make a great pattern, which caught my attention and brings us to my final build.

The Shrine of Nature



It all started with the wolf head pattern mentioned above. It reminded me of a scene from the second Hobbit movie where the protagonists climb an enormous dwarf statue by using the massive texture as stairs. I didn’t wanted to build a giant dwarf, but something smaller, so I began building a monument using this texture.

Soon the structure was done and I decided to place it in a jungle scene. This gave me the chance to build some plants, what I really enjoyed, and also gave the scene a bit of a backstory. To give it a mysterious look I filled the negative space behind the wolf heads with Transparent Bright Green [TLG]/ Trans-Bright Green [BL and Transparent Fluorescent Green [TLG]/ Trans-Neon Green [BL] plates and lit it from below, simply with my smartphone flashlight. The wolf moulds are made from rather thick plastic compared to other bricks which prevented the light form shining through the heads. That would have ruined the effect.

I refined the wolf head pattern by using brackets to make the gaps a bit smaller and Technic pins to change the building direction. That allowed me to easily cover the frame with tiles.



Another wolf head can be found at the top of the shrine.



I also used two horse heads in this scene for the two small statues on the left and right. The mould here is upside down as the undersides make great basins.

The small edge of the horse's snout gives it even more texture. Unfortunately I didn’t find a way to connect them properly so they are only held in place by the 1x3 tiles. The minifigure heads are only connected with a Technic pin.


Aside from the two Minecraft seed parts, I want to point out some more interesting part usages.

  • Two Bright Orange [TLG]/Orange [BL] flagons (Element ID 4163666) as exotic flowers
  • Sand Green Squidward Head (4539400) as a vase
  • Bright Green [TLG]/Green [BL] snake (6213761) as a flower stem
  • Bright Purple [TLG]/Dark Pink [BL] cup (4618670) as the birds body
  • And many more you might spot when exploring the model.



I hope you enjoyed my Anatomy classes and that I managed to inspire you at least a bit.
 Be sure to follow me on the channel of your choice: Instagram, Flickr or Twitter.

And with this tropical build I wish you all a Merry Christmas!


Get your LEGO Minecraft sets at Amazon USA and you help New Elementary keep on publishing!

Help New Elementary keep publishing articles like this. You can send an amount of your choosing via PayPal or card by click the image on the right. Think of it as the price of an app, or a book, or a yearly magazine subscription – whatever we're worth to you, we'd be honoured to receive it.



You can also help us by doing what you perhaps do already - buying from Amazon. Amazon USA: Amazon.com Canada: Amazon.ca UK: Amazon.co.uk Deutschland: Amazon.de

Products mentioned in this post were kindly supplied by the LEGO Group. All content represents the opinions of New Elementary authors and not the LEGO Group. All text and images are © New Elementary unless otherwise attributed.

7 comments:

  1. Simply fabulous! Thank you for great ideas.

    ReplyDelete
  2. love all the colours! that piece near the front that looks like a jar and looks like it is in the colour sand green, can I ask what that piece is please?

    ReplyDelete
  3. It's an upsidedown Squidward Head. It's mentioned in the article.

    /Håkan

    ReplyDelete
  4. I can see and easily identify the snakehead used as a flower stem. The flower itself is one of the old 4-petal variety. After some research, I figured out that the leafy bowl below it is a Ninjago bandana. It's the piece inside that I'm stuck on. I can think of four pieces that could provide the stud that the bowl is attached by. One is right out, as they never made the 1x1 round plate in green. Another is highly unlikely as it would involve sanding off the bottom 3/4 of a green minifig head with either a Y-block or recessed stud. They did make the 4-petal plate in green, but it feels like the petals would stick out too far to allow the stud to stick through that far. Option four is the new 5-petal plate. So, which is it?

    ReplyDelete
    Replies
    1. Good analysis. The piece I used is a green antenna, which sadly was never in a set in that colour, but was produced as a Q-part and somehow found its ways to Bricklink: https://www.bricklink.com/v2/catalog/catalogitem.page?P=3957#T=C

      Delete
    2. @Jonas:
      Wrong part. The bar is pretty obviously a bar. While I didn't realize it was a Q-element, I could recognize what it was. It's the piece used to provide the hollow stud on the underside of the bowl that I'm unclear on. I don't think I own any of this style bandana, but I could see that the petals on the 4-petal flower plate might stick out too far to allow the plate to nest that deeply in the bandana, resulting in less stud being visible. And given that it's designed to work with a minifig head, I could likewise see the 5-petal flower plate being small enough that it either doesn't secure the bandana in the right position, or the hole could be large enough that the plate simply pulls through. Although, thinking on it now, if it doesn't simply fall down to the base of the flower stem, it seems like it should have a hole that's just big enough to fit the neck post, and that it may be gripping the sides of the stud to hold itself up.

      Delete
  5. Seriously. Incredible technique and vision for these pieces. It's a true joy to see articles like this. Thanks Jonas!

    ReplyDelete