January might be done, but we're not done with our coverage of January 2026 LEGO® City sets!
Products in this article were gifted by The LEGO Group; the author's opinions are their own.
This article contains affiliate links to LEGO.com; we may get a small commission if you purchase.
In theory these elements will be available on Pick a Brick in May 2026.
Windscreen Curved 4 x 6 x 2 (7652)
This new canopy has been designed with aesthetics and function in mind; not only does it mirror the look of the roofs of real-life transit vans, the element is hollow to provide plenty of head clearance for minifigures, and just 2 studs on the base for easy removal.
The arc matches that of the 'Corvette bows' Slope Curved 1 x 4 x 1 2/3 No Studs (
3573). In fact, you could make a rough approximation of the element with 6 Corvette bows lined up.
Brick Arch 1 x 5 x 2 - Black (
3572) straddles the element perfectly.
I'm looking forward to seeing this element in a transparent colour for a new windscreen option.
Windscreen 8 x 6 x 2 (7664)
This element appears in three varieties:

This new windscreen has a uniform width of 8
modules, which allows it to stack.
MOC using Windscreen 8 x 6 x 2
Besides windscreens and canopies, the element makes a nice boat hull when turned upside down.
Ring with Bar (7649)
We've already looked at this element in Elspeth's
review of LEGO® Minifigures 71051 Series 28, where it appeared in white and trans-dark pink. It appears again in the LEGO City sets recoloured to a more grounded white and orange combo.
Plate Special 2 x 6 with Axle Holes (7885)
An approximation of the part can be made by combining a 2x2 plate with a Plate Special 2 x 2 with 2 Pin Holes (
2817) on either side. One important difference is that this new element has axle holes rather than pin holes which might help it carve out a useful niche; I think this might appear in play functions as well as vehicles.
Plate 2 x 6 with 2 x 5 Studs and Door Stops on Top (7665)
Plate 2 x 6 with 2 x 5 Studs and Door Stops on Top comes in the following colours and sets:
This new plate jumps the 6 module-wide footprint to 5 on top, and has rails on the sides which act as door stops. These rails run right up to the edge of the element and prevent the element from stacking.
The hollow studs and stud-jumping capabilities recall the LEGO® Speed Champions chassis (
3385, 7913), which is no coincidence: Chris Stamp, design lead for the LEGO City wave, also contributed to the design of those elements when he was design lead of LEGO Speed Champions.
It's a useful new element for building vehicles – the half-module offset helps seat 2 minifigures in a 6-wide cab – and, despite the doorstops, it also appears in the door-less
60503 Coast Guard Helicopter.
While a similar result can be achieved from laying down four 1 x 3 jumper tiles (
34103), aside from the missing door stops, you don't get the 2 central open studs which can be used to add extra details like gearsticks, etc.
An interesting technique that provides extra stability appears in the new LEGO City sets: open studs of round plates are often used in tandem with Plate Special 1 x 4 with Bar Down (
30043, 29169) to lock the elements securely in place. The open stud on this new element could also be used in such a way (above right).
Plate Round Corners 2 x 6 Double with 2 x 3 extension (7797)
This element really is very POOPy: a combination of Plate Round Corners 2 x 6 Double (
18980) with a 2 x 3 plate stuck on top. However, one reason TLG create new elements is stability, and in the new LEGO City sets this piece is often used to make a very stable chassis – much stronger than the 2 individual elements.
The only difference of any note is the deep well in the centre of the element's underside, which might provide some opportunities for novel building techniques.
Mudguard 2 x 4 (7896)
This new element updates the classic 1970s mudguard to bring it more inline with modern LEGO design sensibilities; the angular wheel wells are replaced with rounded ones to echo more recent parts like the
60212 and
93590 mudguard elements pictured above.
The arc of the wheel well is the same as a 2 x 2 module circle, so it has some nice synergy with round elements of the same diameter, as you can see in the tablescraps above. I couldn't get the mudguard and round bricks flush while keeping within the LEGO® System, however.
As well as exhaust ports and astromech sockets, when paired with a couple of panels it makes a nice window or air intake.
Wheel 14mm D. with Pin hole and hollow stud (5708)
This new wheel also debuted in 11370 Stranger Things – The Creel House but they are light bluish grey. You can read more about this part in Elspeth's review of the LEGO Creel House.
Tyre, Tractor 43 x 22 (7616)
- Tyre, Tractor 43 x 22 in Black (6562989 | 7616), found 2x in 60498 Tractor
Up until now, the wheels on LEGO tractors always looked a little mismatched, with different tread patterns on the front and rear wheels. This new tyre features a similar tread to the larger Tyre 56 x 26 Tractor (
70695) to provide a more cohesive look to the tyres in the new LEGO City set,
60498 Tractor.
Lanyard (7954)
The Hidden Disabilities Sunflower is a relatively recent inclusion in LEGO sets, appearing in LEGO City, LEGO® Friends, LEGO® Icons and LEGO® DUPLO® as part of The LEGO Group's broader move toward inclusive representation. Widely recognised in the UK, Europe, and Australia as a symbol indicating the wearer has non-visible disabilities, it is something I only became aware of through LEGO sets, as it is not commonly seen or used here in Japan.
The decision to introduce a dedicated lanyard element is particularly significant, as up until now, it has only appeared as a printed detail. Now that we have a dedicated element that can be used with any minifigure, builders can represent themselves or others more accurately within the LEGO System.
The design of this element seems like it might lend itself to more prints – like a name tag, for example, or reversed as back armor.
Tipper Drum Cement Mixer 7 x 15 x 4 1/2 Half with 4 Technic Pin Holes (7673)

- Tipper Drum Cement Mixer 7 x 15 x 4 1/2 Half with 4 Technic Pin Holes in Dark Bluish Gray (6563398 | 7673), found 2x in 60478 Cement Mixer
This new mixer drum replaces the older 3 x 6 x 10 version (
57792) which last appeared in sets back in 2018.
This highly specialised part has had a total makeover. Not only has the shape of the element been completely overhauled, the LEGO System interface on the base of the previous version has been removed in favor of LEGO Technic System attachments. The position of the 4 LEGO Technic holes in the drum have also been changed from a 5 x 5 square on the old design to a 5 x 7 rectangle.
The 13 module long drum features a central cutout that matches the radius of a 2 x 2 round brick. The narrow end has a 4 module diameter. The opposite, wider end features a 5 module diameter and a 1 x 3 LEGO Technic connection that protrudes from the surface, which is useful in the sets but tricky to work with for MOC purposes. I eventually found an auspiciously good match in Technic Panel Dome 5 x 5 with Pin Holes (
4412) – I love how these work together.

In isolation – and from a MOC-ing perspective – those 1 x 3 module LEGO Technic protrusions are a little odd; they make more sense when the element is paired with itself.
While this new element clearly has a high affinity for LEGO Technic System, it does have a few LEGO System sensibilities too. When it comes to the angles, I found 2 good matches for the shallow slope: 1 x 4 slope (
5654) and 2 x 4 wedge plate, while the steeper slope on the opposite end matches a 2 x 3 wedge plate.
8 x 6 Tile (6320)
- 1x Tile 6 x 8 with Left LEGO Bricks print in White (6579958)
- 1x Tile 6 x 8 with Right LEGO Bricks print in White (6579959)
Only printed versions of this big new tile appear in the LEGO City sets. With a nice clean smooth surface free of mould lines and injection points to print upon, this might also be a nice option for information plaques for Ultimate Collector Series-style display sets.
It's a good piece to provide a uniform finish to large flat areas rather than a mosaic of individual smaller tiles. It could also make a billboard in a future LEGO City set or Modular Building.
Brick Round Curved 1 x 1 x 1 Quarter Dome (5848)
Bracket 1 x 2 - 2 x 2 Centered (7674)
READ MORE: Review of the LEGO® Botanicals March offerings: 11510 Magnolia Branches and 11502 Sunflower Bouquet
Help New Elementary keep publishing articles like this. Become a Patron!
A huge thank you to all our patrons for your support, especially our 'Vibrant Coral' tier: London AFOLs, Antonio Serra, Beyond the Brick,
Huw Millington, Dave Schefcik, David and Breda Fennell, Gerald Lasser, Baixo LMmodels, Sue Ann Barber and Trevor Clark, Markus Rollbühler, Elspeth De Montes, Megan Lum, Andy Price, Chuck Hagenbuch, Jf, Wayne R. Tyler, Daniel Church, Lukas Kurth (StoneWars), Timo Luehnen, Chris Wight, Jonathan Breidert, Brick Owl, BrickCats, Erin and Dale, Thunderdave, Jake Forbes and our newest top-tier patron, H.Y. Leung! You folks are better than inverted cheese slopes.
All text and images are ©2026 New Elementary unless otherwise attributed.
Funny I just order an old Decool mini racer purely for a mudgard part that ressembles a mix of 7896 and 60212, except with a flange. And I thought it was a bit archaic to still do these "car" parts in 2x4, instead of just one half part that can fit cars of all widths, thinking "Lego would not do this anymore". Well...
ReplyDeleteThose wheels, why does LEGO bother adding nice detail, if it's to ruin it with an ejection mark as too often...
The new bracket is a game changer btw.
Mudguards covering a single wheel are definitely more versatile, but I imagine a small one like this that covers two wheels still has advantages when it comes to being simple and sturdy for young builders. Sometimes the qualities that'd make us AFOLs happiest might not be the highest priority.
DeleteAs always, thansk for this article!
ReplyDeleteIs anyone know where I can find more photos/instructions of this lovely MOC boat?