Menu

22 September 2019

How the LEGO® element team designed the new gear wheels

Posted by Admin
We’ve really enjoyed this latest Parts Festival, which now draws to a close, and we are so grateful to the talented artists who gave us their time and creative talents for everyone’s pleasure; in no particular order – Jessica Farrell, Inthert, Jaap Bijl, Duncan Lindbo, Samuel Pister, Sarah Beyer and Jaroslaw Walter.

To complete the festival we will take another look at what are arguably the most noticeable parts in the selection; the new gear wheel plates that we affectionately named ‘splat gears’. You may recall back in March, Elspeth wrote a fantastic post listing the different kinds of LEGO gears through history, including an examination of the new splat gear family.


It seems LEGO enjoyed her post too! – we later received this fascinating email from Marinus Jasperse on behalf of the Element Design Platform Team at the LEGO Group about the development of the new gear family...


It is great to see, again, a thorough analysis by New Elementary, now on the new LEGO System plate gear wheels. And fun to see a similar search down memory lane as we did, comparing these gears with preceding versions.

© 1970 The LEGO Group, courtesy of Brickset

At the start of the development we dug up some old boxes for inspiration and looked at set 802 from 1970 and set 003 Master Mechanic from LEGO, produced by the Samsonite corporation back in 1966. These boxes showcase the broad use of gear wheels, from dancing figures up to decorative use as Viking shields. Same as is intended now, the plate gear wheels can be anything from creating interconnecting functions of course – showing how gears works for an early age audience – to being a splash of paint.

© 1966 The LEGO Group, courtesy of Brickset


The initial brief came from our colleagues in the design organisation, where the desire for a gear wheel outside of the LEGO Technic program arose. We wanted to create a lower-age gear system with basic technical principles, to show how gear wheels work. This fitted best in the LEGO building system.

We started by using the turntable plate (Bottom W. Turntable 4X4 – 61485) for a base. The first mock-ups were round 2x2, 4x4 and 6x6 plates with glued-on 1x1 round plates so as to create gears with meshing teeth. This allowed for easy building, for children to quickly set up a gear train on a plate and play together with other bricks – much quicker than would be possible with the existing Technic gears.

The gears run freely on the turntables (‘clicking’ only happens on the interface of a 4x4 turntable with a 4x4 round 1M high brick).

When the different gear wheel sizes interact, the knobs’ positioning in respect to each other changes. This could lead to possible building mistakes and so we added an arrow to indicate the upwards position. This arrow is used for reference in the building instructions as a mean to align the gears in the intended way.

In one of the final iterations, a chamfer on the top edge was added to allow perpendicular interaction between the gears.




We investigated the possibility of having the gear teeth meshing with round 1x1 bricks. Unfortunately, this didn’t work with the necessary module measurements of the gear teeth themselves. We also tried having knobs on the gear teeth, but the knobs’ positions would be completely out of grid (especially when moved) making building for children difficult as it’s not fitting with the gear teeth modules.

The gears are however designed to fit together with knobs placed on an array of a jumper plate followed by a 1x1, so as to build a linear actuator. Another possibility is to stack bricks with knobs on the side with one plate in between to build a vertical actuator.

Thanks so much to Marinus for sending us that fascinating insight! We were particularly intrigued by the comment about linear actuators and asked our Parts Festival participant Jaroslaw Walter to investigate. He created both the horizontal and vertical versions mentioned by Marinus in the one model.



On the left you see the horizontal actuator with studs placed 1.5 modules apart (equivalent to 12mm, achieved by a row of 1x1 plates followed by 1x2 jumpers). On the right is the vertical actuator with studs placed 1.6 modules apart (equivalent to 12.8mm, achieved by stacking 1x1 plates on 1x1 SNOT bricks).

But of course, you want to see it in action!



You will have noted that Jaroslaw added bars to the vertical actuator; he did this as the gear didn't catch well. First he tried adding a round plate on top but it was too high and didn't work. It may be because the vertical version has studs 0.8mm further apart than the horizontal version, or it may just be that his particular model lacks sufficient stability. If you use this technique you could probably achieve greater stability. One thought I had is that stacking pieces wider than one module to create the vertical actuator might be more stable, as there won't be any rotation.


So get actuating! To date, the available splat gears are:
  • Gear Wheel 6X6, Z14 in Medium Azure (6278149|35446) which was recently released in 75937 Triceratop's Rampage 
  • Gear Wheel 4X4, Z10 in Medium Azure (6238331|35443) found in 41366 Olivia's Cupcake Cafe, 41368: Andrea's Talent Show, 75937 Triceratops Rampage and 75948 Hogwarts Clock Tower
  • Gear Wheel 2X2, Z6 in Medium Azure (6271207|35442) which was recently released in 75948 Hogwart's Clock Tower
  • Gear Wheel 6X6, Z14 in Vibrant Coral (Element ID 6258385 | Design ID 35446), found only in 70828: Pop-Up Party Bus so far
  • Gear Wheel 4X4, Z10 in Dark Stone Grey/ Dark Bluish Gray (6252371|35443), only in 70670 Monastery of Spinjitzu
  • Gear Wheel 2X2, Z6 in Medium Lilac/ Dark Purple (6238330|35442) found in 41366 Olivia's Cupcake Cafe, 70670 Monastery of Spinjitzu, 70828 Pop-Up Party Bus and 70837 Shimmer & Shine Sparkle Spa!



Help New Elementary keep publishing articles like this. Become a Patron!

Thanks to our 'Vibrant Coral' patrons: London AFOLs, Gerald Lasser, Big B Bricks, Dave Schefcik, David and Breda Fennell, Iain Adams, Huw Millington, Neil Crosby, Antonio Serra, Beyond the Brick, Sue Ann Barber & Trevor Clark, and Kevin Gascoigne. You're all awesome!

You can also help us by doing what you perhaps do already - buying from Amazon. Amazon USA: Amazon.com Canada: Amazon.ca UK: Amazon.co.uk Deutschland: Amazon.de

Search New Elementary


All content represents the opinions of New Elementary authors and not the LEGO Group. All text and images are © New Elementary unless otherwise attributed.

11 comments:

  1. I love building with these splat gears! I have collected a few so that I can play about with designs and ideas :)
    Incidentally, all sizes of these new plates are available in the Medium Azure colour. they can be acquired through Bricklink or the Lego bricks and pieces service.
    Hope you write more about these gear plates, especially new designs you have come up with! :)

    ReplyDelete
    Replies
    1. Gear wheel 2x2 in medium azure (35442) was released in Hogwart's Clock Tower (set 75948) and
      Gear wheel 6x6 in medium azure (35446) came in set Triceratop's Rampage (set 75937)

      Delete
    2. Oops! I knew about one of those and forgot, and didn't know about the other. Really should have double checked. How cool they all come in one colour now! Thanks so much for alerting me Peter, have updated the post.

      Delete
  2. Awesome! I hadn't thought of the linear actuator use yet.

    ReplyDelete
    Replies
    1. I haven't come across it on the web yet, so not sure if anyone else had either.

      Delete
    2. Horizontal use is appeared in BricQ motion essential set in education line.

      Delete
  3. I really wish Lego would release a like set 003 Master Mechanic but with these new splat gears + other components, show casing their capabilities - such as the dancing figures mentioned in that set. It would be nice if the set included these gear pieces in all sizes and in a variety of different colours. I'd certainly buy it!

    ReplyDelete
  4. Very neat stuff! This makes me think you could build some larger "gear" wheels, like large ring gears or other curved structures.

    I was hoping maybe an existing fence or ladder piece would mesh with the splat gears, but it seems the rung spacing is too narrow.

    ReplyDelete
    Replies
    1. That's a cool idea though! Somebody test all LEGO ladders :)

      Delete
    2. I don't have any splat gears, but the other thing that seems to have, maybe, 1.5 stud spacing is the bars on the newer big track links. (Technic Link tread Wide 57518 on Bricklink, apoogies I am not sure of the proper way to name things).

      Delete
    3. Hmmm I don't have any, hopefully someone will try this out and let us know!

      Delete