LEGO® 75551 Brick-Built Minions and Their Lair: Lee's alternate builds

Lee (cityson on Flickr) creates MOCs for you today using only the parts from LEGO® 75551 Brick-Built Minions and Their Lair, a 2020 set containing many interesting new moulds. Buying this set? Consider using our affiliate links: UK LEGO Shop | USA LEGO Shop | Australia LEGO Shop (for other countries 'Change Region') or try UK Amazon | USA Amazon. New Elementary may get a commission. The products in this article were provided for free by LEGO; the author's opinions are not biased by this.

Last October, Tim Johnson took quite a thorough look at all the interesting parts in the 2 released LEGO® Minions: The Rise of Gru sets. While fans are still waiting for the postponed movie and its tie-in sets to be released, I have taken some time to see what alternate models can be rebuilt from the lovely set 75551 Brick-Built Minions and Their Lair. 

Sadly, I found myself running into a classic creative block. On the bright side, the set has given me 3 Minions minifigures, so I decided to outsource my task to Kevin, Stuart and Bob and see what they can come up with instead.

Old Elementary: Insectoids eyes

The eyes have it! In his third and final examination of interesting LEGO® pieces introduced for the 1998 Space theme Insectoids, Duncan Lindbo (donutsftw) takes a 'look' at two parts comprising the aliens' eyes, and builds original creations of his own using them.

Today, we’re journeying back once again to the days of the late 1990s to cast our gaze upon some old LEGO® Insectoids parts. But these parts can gaze back! That’s because we’re looking at Cylinder Hemisphere 4x4 Multifaceted (30208) and Plate, Modified 1x2 with 4x4 Dish at 90° (30209), a pair of parts which were first introduced as ‘eyes’ in the Insectoids line.

LEGO® DOTS: Cole Blaq's bracelet & tile ideas

So far Cole Blaq has used the LEGO® DOTS bracelets we sent him to create viruses and sea creatures and for his final post today he presents a collection of tablescraps, techniques and smaller ideas using both the bracelets as well as the printed tiles, to inspire you. Cole is an artist and educator in Germany primarily influenced by graffiti and LEGO. The Dots products in this article were provided for free by LEGO; the author's opinions are not biased by this.

I received three copies each of 41900 Rainbow, 41902 Sparkly Unicorn, 41901 Funky Animals and 41912 Love Birds. With such a limited parts selection, I concentrated on the rubber bracelets and on a few selected printed tiles. The available connections for mounting the bracelets are not that easy to integrate with the LEGO System. Therefore I had to get around this, which led to some not-so-smooth solutions. While the studs do have a firm grip, once they are bent (or have no counter-pressure from the rear side) attaching stuff to them is tricky, unstable and often disappointing.

First of all a tribar, or ‘Penrose triangle’.

Tipper Ends: Eero Okkonen's Aurora Sievert & Hurricane III

Yesterday, Eero Okkonen examined in great detail the history and geometry of the 'Tipper End Family' of LEGO® pieces, especially Vehicle, Tipper End Flat with Pins (Design ID 3145) and Vehicle, Tipper End Sloped (3436). Today he reveals this never-before-published model he built in February using tipper ends, but first he takes us through earlier models where he utilised these unusual parts that were introduced five decades ago.  

Previous Builds

A more mathematical approach to tipper ends is a new and exciting world to me, but I’ve used them few times before, mostly as armour shells or clothing, something akin to Constraction shells.

Old Elementary: Odds & Tipper Ends

We take another trip into LEGO® part history today to discover a kind of piece introduced 51 years ago that is still found in sets in 2020; 'tipper ends'. They're a passion for Finnish LEGO builder Eero Okkonen and today he delves deep into their geometry and reveals building techniques utilising them.

As we all very well know, adults complain 64% of the time that everything was better when they were kids; the only LEGO® bricks were basic angular blocks (and lost behind the radiator probably) and you could build everything based on your own imagination and didn’t have to follow the instructions and it made you a better person in the end. I don’t think like that, and one of the biggest joys depicted here on New Elementary and in contests like Iron Builder (and hopefully in my own work) is finding new, fresh uses to odd and curious parts, no matter what their original use in the sets was.

This article is about what I will call the Tipper End Family; today I’ll introduce the parts and their history, then go through their dimensions with a series of tablescraps and explanatory pictures, then tomorrow show some older builds of mine using these pieces and close with an unpublished build.

LEGO® Star Wars review & original builds: 75272 Sith Tie Fighter

Inthert (on Instagram & Flickr) returns today not only to review LEGO® Star Wars 75272 Sith Tie Fighter but to also use its parts, along with his own collection, to create his own fantastic original Star Wars models! The set has 470 elements, three minifigures and is available now priced at £64.99 / US$79.99 / 69.99€.

The Parts

Upon its release at the start of 2020, the Sith Tie Fighter was one of two sets to feature some new wedge plates (alongside Speed Champions 76898 Formula E Panasonic Jaguar Racing GEN2 Car & Jaguar I-PACE eTROPHY, which Duncan Lindbo previously reviewed).

Switch My Lantern Up: The winners

It is finally time to reveal which five LEGO® creations from our contest, Switch My Lantern Up, will be receiving the prizes of LEGO® Fiat 500s! We were going to announce them yesterday but it has been such a tough one to judge, and there were 88 models submitted using the Super Heroes lantern (part 65581).

This time the judges were Victor Pruvost and Tim Johnson from New Elementary, and none other than the LEGO Senior Designer who actually designed the lantern piece, Esa Nousiainen! We were honoured to have him and he was really impressed with what he saw:

Switch My Lantern Up: The entries (Vol. 3)

Today we reveal the final 25 entries to our LEGO® building contest, where you had to find a new use for the Super Heroes lantern (part 65581). The judges' decisions will be published on Saturday, unless we argue about it for too long! Hard when there are so many awesome ideas!

Old Diving Suit by GSCLD

Switch My Lantern Up: The entries (Vol. 2)

Today we continue revealing the entries to our LEGO® building contest, where you had to find a new use for the Super Heroes lantern (part 65581). Let's see what the next 30 entries were!

Peacock by Krakenbrix

In this build, I used the seed part as feathers for a peacock. The feathers are attached to a wedge belt tire (part 2815 and 4185) to obtain the radial design.

Switch My Lantern Up: The entries (Vol. 1)

Our LEGO® building contest, where you had to find a new use for the Super Heroes lantern (part 65581) has now closed, so while our judges are getting all judgey and deciding which five win the LEGO Fiats, let's look at all the entries we received!

There were a whopping 89 fabulous creations submitted by you lot, and we will reveal them over the course of three days, in the order we received them. Thank you all, for sharing these wonderful ideas.

Iron Builder: Bryce Dempsey's stud shooter techniques

The Iron Forge contestant from the Iron Builder challenge revealing their LEGO® techniques for you today is Bryce Dempsey (on Flickr, YouTube and Instagram), from California. Appropriately enough for a builder who creates replica guns from LEGO pieces, last week in Round 3 the seed part was part 15391, the Minifigure, Weapon Gun, Mini Blaster / Shooter. 

My favorite of my own builds for Round 3 using stud shooters as the seed part was the soda machine. The build featured 11 stud shooters in total, with many unique uses.

Iron Builder: Stud Shooter LEGO® building techniques

We've been asking the Forge competitors from Iron Builder to highlight the techniques they've used each week with the seed parts. In Round 3 last week the element they all had to use was Design ID 15391, known as the "Minifigure, Weapon Gun, Mini Blaster / Shooter" on BrickLink, "Mini Shooter With Ø3.2 Shaft" on Brickset and "Weapon Gun / Blaster / Shooter Mini" on Rebrickable. Since being introduced in 2014 it has appeared in six colours. Given many would consider this a "specialised element that can only be used for one thing", it was a great choice of seed part by the Iron Builder admin!

---

Miro78: I found an interesting 'non-connection' with the stud shooters during my Round 3 builds, in the build Zorro where I included some furniture. 

Iron Builder: Thomas Jenkins' stud shooter techniques

We have another Iron Forge contestant from the Iron Builder challenge revealing their LEGO® techniques for you today: Thomas Jenkins (on Flickr and Instagram), a Welshman living in Japan who has been building with LEGO for over 20 years. Last week in Round 3 the seed part was part 15391, the Minifigure, Weapon Gun, Mini Blaster / Shooter. 

On my first assessment of the Stud Shooter piece, there were two ways to use it in a model: take advantage of the bar that sticks out at an angle from the barrel of the shooter, or utilize the gaps and recesses that are usually used to house the accompanying trigger element.

Techniques using the angled bar of LEGO Mini Shooter With Ø3.2 Shaft, Design ID 15391

The angle of the bar meant that when used in conjunction with more shooters, it was quite easy to reproduce something akin to a spider’s leg. 

The shooters are connected quite simply with a 1x1 round plate with hole. The spanner seed part from the previous round also found its way into this model!

Iron Builder: Cab's White Diamond techniques

We have another Iron Forge contestant from the Iron Builder challenge revealing LEGO® techniques for you today. Cab (on Flickr) hails from Germany but lives in California, and turned eighteen recently... "so I don't even know whether to call myself a TFOL or an AFOL". We don't think it matters really, so long as your techniques are awesome!

Hello everyone, Cab here! I was lucky enough to be among the final 20 contestants in this year’s instalment of The Forge. Now, while the final four compete for the prized Iron Builder slot, I thought I would share some techniques and tricks from my main entry in Round 2, a bust of the character White Diamond from the show Steven Universe. 

Adept builders will probably be familiar with many or all of these techniques, but I hope I can contribute to a few builders’ technical arsenals. 

Iron Builder: Jaap Bijl's hummingbird techniques

One of the contestants in Iron Builders preliminary rounds, The Iron Forge, is Jaap Bijl (jaapxaap, found on Flickr and Instagram) from the Netherlands and he is a member of Lowlug and Innovalug. He took part in our 2019 Parts Festival and has now progressed from the Top 20 to the Top 8 in the Forge. We asked him to explain a couple of the techniques involved in one of his Forge builds from last week.

Hey everyone, it’s Jaap here! I’ve been participating into the Iron Forge contest, and made it to the final 20. In that round we had to build using the hammer and/or the wrench minifig accessory pieces. At some point when I was playing around with the wrench piece I found a wrench combination that looked a lot like a bird’s beak to me. So there I started building this hummingbird.

(Yes, for those New Elementary readers who remember it, I also used those big yellow stars from the 2019 parts festival in the flowers!)

Iron Builder: Hammer & Spanner LEGO® building techniques

It's easy to look at a MOC and think, wow, that's beautiful... without appreciating all the astonishing connection techniques involved. Especially in a LEGO® contest like Iron Builder's Iron Forge where the brilliance is steadily poured into your eyeballs on a daily basis. I find it can even be a bit intimidating: how on earth could I ever build that well? Here's one by #1 Nomad:

So we've partnered with Iron Builder to break things down a little for you and reveal some of the techniques used by these amazing builders in the hope it inspires you, and improves everyone's game. We chatted with some of the talented competitors who made the Top 20 last week to ask how they used the seed parts, which were two classic Minifigure Utensil Tools: the Spanner Wrench / Screwdriver (Design IDs 4006 & 88631) and Mallet / Hammer (Design ID 4522).

Minifig Posing Stand: Pierre-E Fieschi's starfighters

This year we have been examining an interesting new LEGO® part: the new posing element (Design ID 65578) known as "Handle, No.1", "Minifigure, Utensil Posing Stand, Bar with Hollow Stud" or "Bar, Angled with Stud on End". Following on from Jonas Kramm's and Kevin Levell's analyses, our final article reveals what gaming concept artist Pierre-E Fieschi (see his Instagram, ArtStation) created using the posing stands we sent him.

Mini LEGO TIE interceptor

I had the idea to make a mini TIE interceptor from Star Wars - which is one of my favourite TIE designs – using the 45° trans-clear thingies instead of the usual hinge/clip assemblies for the wings.

LEGO® Reverse-Engineering Challenge: Days 6-17

We are a little behind with sharing Ryan Howerter's REC puzzles with you (been too busy organising our own building contest!) so here is a bumper crop to give you a challenging LEGO® challenge to fill your days. Want more? They appear on Ryan's Instagram at 11am Mountain Time every day (and we also try to publish them on New Elementary's Twitter at the same time).

Welcome back to the Reverse-Engineering Challenge, or REC for short. Simply look at these small LEGO builds, and try to figure out how they are built. Always assume the hidden side is identical. The colours are irrelevant. No rubber bands and no flex tubing allowed! It's not a contest, there are no prizes – think of it more like a daily crossword puzzle. Solve as many as you like, at your own pace. Solutions are posted every Sunday at https://linktr.ee/rhowerter.

REC17 Halhi141 

Bottom looks like the top.

LEGO® Creator Expert review: 10271 Fiat 500 – The Build

Following his examination of the new parts, Inthert returns today to report on the actual build of LEGO® Creator Expert 10271 Fiat 500. (And don't forget, you could win a copy of the set in our latest building competition!)

While the most striking thing about the LEGO® Creator Expert Fiat 500 is unquestionably its Cool Yellow/ Bright Light Yellow base colour, the set has much more to offer than just recolours! Today we’ll be delving deeper into the build process before taking a look at the completed model.

LEGO® NINJAGO™ Arcade Pods: Victor Pruvost's Computer and Rover

2020 seems to be a bit of a year for LEGO® pods. The Friends, Ninjago and Trolls lines all feature large two-piece containers that you might struggle to think of uses for. Today, Victor Pruvost examines the second of these: the LEGO NINJAGO Arcade Pods which come in sets 71714 Kai Avatar, 71715 Jay Avatar and 71716 Lloyd Avatar.

Breaking away from the usual spinners, flyers and other Spinjitzu-related entry-level sets, LEGO® released three Arcade Pods as part of the latest Ninjago wave, which is inspired by video games. Like the new Friends Play Cubes, these Arcade Pods are built around two specialized new parts, which we’re examining today.

Those two elements are:

• Arcade Front (Design ID 65067), which comes in the three classic colours Bright Red/ Red (Element ID 6287556), Bright Blue/ Blue (6287557), and Dark Green/ Green (6287559). It is called Design Element, Front, 6X6X7 by TLG/Brickset, Minifigure, Utensil Arcade Game Cabinet Body by BrickLink and Pod, Arcade Machine by Rebrickable.
• Arcade Back (Design ID 65068), which is only available in Dark Stone Grey/ Dark Bluish Gray (Element ID 6287562). It is called Design Element, Back, 6X8X1, W/3.2 Shaft by TLG/Brickset, Minifigure, Utensil Arcade Game Cabinet Back by BrickLink and Plate Special 6 x 8 x 1 with Bar, Door by Rebrickable.

Interestingly enough, Element IDs 6287558, 6287560 and 6287561 aren’t assigned, so I wonder if there could be more Arcade Pods in the future for the other Ninjas, with different colours.